Job Search Results

488 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:27PM Pacific Time by ContractJobHunter. )

Listings 1 - 488

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
15 Stress Engineers Needed - Active Secret Clearance

Description:
REQUIRED: MUST HAVE Active Secret Clearance with recent background investigation within the last 6 years.

5+ years of experience in the analysis of aerospace structures. Experience in the analysis of composite aircraft structures is required.
Preferred: Experience in NX, TeamCenter, MSC Analysis Tools (Nastran, Patran, etc.),
OT expected to be 8 to 16 hours per week.

The Structures Company is an AA/EOE.
 
Job Location: Wichita, KS
Rate: $70-90/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: February 2018
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer ( Dulles, VA ) 7598203, GNC

Description:
Aerospace Engineer ( Dulles, VA ) 7598203
6 Month Contract

Pay Rate : $80/hr

**Looking for cand. w/ Satellite exp. Need strong GNC background/education/work exp. Exp. designing guidance and controls systems pref. Knowledge of GNC software important.

Cand. w/ hands-on exp. are key. No work from home or contractors who have moved around a lot. Should have steady exp. working with known companies. Looking for at least 10 yrs of exp. 3-5 yrs/fresh outs will not work. Do not want to spend time training unskilled workers.

Cand. will work with Product Lead and report to the Sr. Mgr of Eng.**

Perform spacecraft attitude control systems analysis, design, development and test activities. Design and develop spacecraft Guidance, Navigation and control algorithms using MATLAB and Simulink. Develop subsystem specifications, GNC Flight software and GNC test scripts. Develop and test operations scripts. Document analysis results and create presentation materials.
 
Job Number: 7598203
Job Location: Dulles, VA
Rate: 80
Per Diem: Split
Overtime: Yes
Duration: 6 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Cabin Safety - Equipment Furnishing

Description:
Job Duties and Responsibilities (Essential Functions):
1. Leads a team of engineers responsible for all engineering deliverables
2. Provides specialized technical assistance to team members
3. Provides technical solutions to a wide range of challenges and opportunities
4. Works under limited supervision
5. Acts as liaison with other teams, internally and externally, including suppliers. Ensure communication channels are world-class.
6. Improves tools and processes for improved effectiveness
7. Performs other duties as assigned

Skills:
This position requires experience with the design, installation, and certification of aircraft systems and equipment. The candidate should have experience integrating with other teams and suppliers. Additionally, the candidate should have experience leading a team, effective communication skills and exceptional organization skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience.

Other Requiprements:
5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelor.
Experience type certification program (preferred).
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
STS AeroStaff Services now offers Aerospace Engineer jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Oversees the development, design and production of repair, modification, process, and inspection documentation in support of our client’s worldwide maintenance activities
• Assist and provide guidance in the assessment of structural, system, cabin, or avionics difficulties affecting line maintenance
• This includes SRM/AMM navigation, IPC interchangeability, AD/Service Bulletin/modification status, and compliance to all FAA standards (Fuel Tank Safety CCDLs, EWIS requirements, CMRs and AWLs)
• Responsible to coordinate trouble shooting and corrective actions (repair, modification, and inspection instructions) with maintenance technicians, managers, and foremen to minimize impact to the operations
• Responsible to always practice safety-conscious behaviors
• Working hours based on operational requirements

Basic Qualifications:

• Four year accredited undergraduate engineering degree required
• Aeronautical/Aerospace, Electrical, Mechanical preferred
• Must possess communication and technical credibility skills in at least one of the following areas: (1) Structural Analysis, including Statics, Mechanics of Deformable Bodies, Materials Science and Fracture Mechanics; or (2) troubleshooting and corrective actions with cabin/aircraft/electrical systems
• 15+ years’ of specific experience in the design and analysis of aircraft structure, system, avionics, and/or cabin, or repairs
• Ability to analyze incomplete information, make timely decisions, develop innovative solutions, and mitigate risks to both safety and the operations
• Excellent interpersonal skills and the ability to work effectively with all levels of engineering, maintenance, and planning
• Must be able to navigate and comprehend FAA and EASA regulations
• Candidate must be available for on-site job training and business familiarization required during the initial period of employment
• Develops both strategic and tactical plans that create a safety-conscious environment resulting in employee safety and well-being

Preferred Qualifications:

• Previous experience with aging aircraft structure
• At least 1 year of experience providing engineering support for line aircraft and live aircraft operations
• Working knowledge of Microsoft programs (Word, Excel, Access) and AutoCAD/SolidWorks (or similar CAD software)
• SIDA Badge Required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40913
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
CNC Programmer IV

Location: Canoga Park, CA
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

Duties:
Must show this experience on resume:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
- Bachelors degree or equivalent experience.
 
Job Number: 7811
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV CA (local only)

Description:
Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **



** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.








Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **



** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **



** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:

-NX Post Builder expertise

-NX Machine tool Configurator expertise

-Vericut Machine Builder expertise

-Fanuc custom macro programming expertise

-Siemens 840D macro programming expertise

Education:
Bachelors degree or equivalant experience.

Skills:
Required
SIEMENS NC PROGRAMMING LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 01/29/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 46/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract

**Candidates must have an active Secret clearance or have had one within the last 2 years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Component Product Engineering (Project Engineering) in Rotating Machinery
-Candidates must have 6 to 9 years of experience
-This roll will not convert to a direct hire role unless circumstances significantly change

Skills:
Required:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
**Candidates must have an active Secret clearance or have had one within the last 2 years**
- BS Engineering or Equivalent BS degree
 
Job Number: 8145
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) / Rotating Machinery with active secret FL

Description:
Job Title: Component Product Engineer (Project Engineer) / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must have an active Secret clearance **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **





-Component Product Engineering (Project Engineering) in Rotating Machinery



-Candidates must have 6 to 9 years of experience



-This roll will not convert to a direct hire role unless circumstances significantly change





Key Words:

Turbomachinery, rotating machinery, design, fabrication, active secret clearance

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEERAEROSPACEFABRICATIONACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 12/31/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7470352
Job Location: Jupiter, FL
Rate: 45/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6+ month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** These are Project Engineering roles with a focus on Fabrication **
** These rolls will not convert to a direct hire role unless circumstances significantly change **
** Candidates must have 6 to 9 years of experience **

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.


Education:
BS Engineering or Equivalent BS degree
 
Job Number: 8334
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
7624480/7449330

Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** These are Project Engineering roles with a focus on Fabrication **



** These rolls will not convert to a direct hire role unless circumstances significantly change **



** Candidates must have 6 to 9 years of experience **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree


Skills:
Required

PROJECT ENGINEER FABRICATION AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7624480
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer (aerospace)

Description:
60% - Lead mechanical design activities for composite structures. Composite structures design activities include strategic booster motor composite cases, tactical rocket motor cases, composite armaments, composite over-wrapped pressure vessels, and composite flight structures. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment. Work is reviewed by senior staff.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports

-Possible travel to Sacramento, CA and or GD Lincoln, NB. Trips typically three to four days at a time. Likely one trip per month depending upon activity.
 
Job Number: AJ-7544355
Job Location: Huntsville, AL
Rate: $44/hr
Per Diem: split
Overtime: possible
Duration: open
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris Hamilton
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrator

Description:
Administration of inbound logistics costs and billing of logistics costs. Requires research of all inbound deliveries to determine method of freight utilized and associated logistics costs / import duties, comparison to contracts to determine applicability of billing requirements, and population of background information into SAP orders to support quoting activity.

Activities will also include ability to interact with internal management for reviews of progress, as well as interfacing with customers and suppliers where necessary to coordinate activity.

Other responsibilities may include initial acknowledgement of repair orders, quoting, shipment and invoicing of customer orders, as well as managing contractual requirements. Individual must be able to consistently perform assigned duties in a self-directed and timely manner.

Scheduled work week: 7:30am to 4:00pm Monday thru Friday. Overtime and Weekend coverage may be necessary. Flexibility is a must.

Education / Certifications: BS/BA Degree in business or a related field.

Experience / Qualifications: 1-3 years work experience, preferably experience dealing with Aerospace Airline and Military customers. The ability to communicate well both verbally and in writing is essential. Knowledge/utilization of ACE tools, prior experience with SAP, administration of contractual terms and/or bilingual skills would represent a definite plus.
 
Job Number: 40291
Job Location: Windsor Locks, CT
Duration: 24 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contracts Specialist

Description:
Contracts Specialist

Location: Pomona, CA
Pay Rate: $30.95/hr
Duration: 6 month W2 contract
Shift: First, 8:00am – 5:00pm
**MUST be a U.S. CITIZEN**

This Company in Pomona is among the largest domestic suppliers of technologically advanced aerospace and defense sensing instrumentation. We design, develop, manufacture and support sophisticated sensors and analytical instruments for space, defense and homeland security applications. Our major products are space instruments, atmospheric monitors and chemical/biological detection systems.

JOB DESCRIPTION:
Pomona is seeking a motivated individual who is responsible for the negotiations and administration of contracts in support of the Company business.
Responsibilities include proposal support, negotiations, contract management of contract teaming agreements, etc. consisting of change management, accounts receivable, customer communications, export and import compliance, and contract closeout.

The candidate should demonstrate knowledge of negotiating and administering various contracts.
Must be familiar with and demonstrate an ability to review and provide comments of RFPs, RFIs, proposals and change proposals to minimize contractual risk.
Must ensure compliance with all regulatory requirements, with extensive experience in change management on various types of contracts.
Candidate must be able to work with Supply Chain to ensure contract requirements are successfully met.
Support the review of corporate documents, submissions, etc. for purposes of ensuring compliance with a variety of specific government regulations.

Education:
BS/BA in Management or related field

EXPERIENCE/QUALIFICATIONS:
7+ years experience in government and commercial contracting 5 years in government contract administration
Excellent communication skills, both written and oral
Ability to work independently
Strong negotiation skills are required as well as working knowledge of FAR/DFAR regulations.
Experience with SAP preferred.
Assist in leading group process improvements using our Company continuous improvement system (ACE), including the continued development of standard work for program management group processes.
Actively support the organization’s efforts to meet or exceed EH&S goals and plans, must comply with the EH&S Policy and applicable regulatory and company EH&S rules and requirements.
 
Job Number: 8349
Job Location: Pomona, CA
Rate: 30.95
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Fort Worth, TX
1 Year Contract
$39.00/Hr

Description/Details:

• Report to a design lead on the 1018 program
• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as.
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing gear assemblies
o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes:
o Associated parts list
o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation

Basic Qualifications:
• BS in Mechanical or Aerospace Engineering or 10 years industry experience
• 10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8480
Job Location: Fort Worth, TX
Rate: 39.00
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Ridley Park

Description:
EE Technical Designer 3

Location: Ridley Park, PA
Duration: 6 months

Job Description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction. Additionally...Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred.

Skill Code:
65L-Wiring Installation Design

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-01344
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/12/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineering

Description:
UNIQUE SKILLS
Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-736-93664
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We have a client in the Pacific NW seeking an Aircraft Electrical Design Engineer for a potentially long term assignment

JOB RESPONSIBILITIES
Applies standard engineering techniques involving innovations of methodology to provide solutions to problems involving a limited number of variables. Experience on Airbus type Aircraft preferred.

Performs low to medium complex circuit/wiring design activities including electrical load analysis and subsequently, prepares appropriate validation and verification means.

Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.

Typically focuses on existing products or processes.
Liaises with drafters, technicians, and others to contribute to project completion.

Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
· Performs other related duties as required.

MINIMUM REQUIREMENTS
Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and a minimum of 10 years related professional experience and/or training; alternatively, an equivalent combination of education and experience.

If interested please include your desired rate, availability, and your resume in a word.doc format.

Thank you
 
Job Number: KEL090918
Job Location: Pacific NW
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/16/2022
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Eng wCatia V5 - TS II

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• EWIS knowledge. Wire Harness Routing. Wire Harness Installation. CATIA V5 Electrical Workbench.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-256
Job Location: Savannah, GA
Rate: $60 - $67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II ( Chandler, AZ ) 7802712

Description:
Electrical Engineer II ( Chandler, AZ ) 7802712
11 month Contract

Pay Rate: $50/hr w2

Work with a team of engineers to develop electromagnetic models to capture electromagnetic environment effects (E3)including the prediction of pin level transients. Work within a cross functional team to leverage inputs from CAD, subsystems and systems engineering to develop a baseline electromagnetic model and increment as the system design evolves to capture E3 effects. Updates to the model may include general design changes or the evaluation of potential mitigation approaches. Responsible for model validation through the selection of hardware sets which may be components, subsystems or a combination of them. Includes the development of test plans for the evaluation of those hardware sets with demonstration of model validation though appropriate comparisons between the model and measurements. Travel of up to 25% of the time may be required.

Job Snapshot: Must haves:
Experience with electromagnetic environment effects (E3). On the resume that may show up as intra-system electromagnetic compatibility (EMC), Subsystem and equipment electromagnetic interference (EMI), Lightning,…
Aerospace experience (rocket (launch) or satellite systems)
Active Secret Clearance (or cleared within the past year)
 
Job Number: 7802712
Job Location: Chandler, AZ
Rate: 50
Per Diem: Yes
Overtime: yes
Duration: 11 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer-Special Missions

Description:
UNIQUE SKILLS
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Client products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 17-783-115282
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Special Missions

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract (1-4 years)
Shift:1st Shift


Unique Skills:
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Everett, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-19956
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Job Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-19959
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS SYSTEMS / SOFTWARE ENGINEER

Description:
ENEA is working with a client to provide System Software Analysis on Flight Management Systems (FMS). We are looking for an engineer with direct FMS experience and has functional expertise in one of the following areas: Performance, Navigation, Guidance, or Communications/DataLink.
RESPONSIBILITIES:
• Perform system optimization and assess overall performance through the use of in-house or custom-developed analysis tools.
• Compare the performance of architecture variants and conduct trade studies.
• Mentor and work with junior analysts as part of larger study teams.
• Apply broad and/or deep experience with customer aerospace systems and technologies in one or more specific functional areas (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide expert advice within a specific technology or functional area (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide support for growing modeling and analysis capabilities in new support areas.
• Interact independently with program office and customer organizations.
• Creatively and effectively apply analysis to problems as needed.
BASIC QUALIFICATIONS:
• BS degree in Engineering (preferably Computer Science or Electrical Engineering)
• 10+ years’ experience in Systems and Software Engineering.
• Substantial experience or background in one of the following areas: architecture performance analysis and modeling; optimization and/or decision support; communications systems analysis; electronics systems analysis, software and/or simulation development.
• Excellent written and verbal communication skills.
• Dependability and good interpersonal skills.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive to Medical and Avionics. We have offices in Europe, North America, and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
Enea Software and Services, Inc.

(Enea) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Enea complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Enea Software and Services, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Enea’s employees to perform their job duties may result in discipline up to and including discharge.
 
Job Number: WW011118GE
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 3-6 MONTHS
Start Date: 1.22.18
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer - Aerospace

Description:
Currently seeking multiple contract or direct Flight Test Engineers to join a growing team in Seattle, WA. Relocation or frequent travel to Moses Lake required.

The ideal candidate will hold a Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science and possess 5+ years relevant work experience related to experimental flight test operations.

Responsibilities of the Aerospace Flight Test Engineer:

- Coordinate test and certification requirements.
- Author flight test and ground test plans including test hazard analysis.
- Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
- Support flight and ground test conduct and data collection.
- Analyze test data and evaluate compliance with regulations.
- Prepare certification test reports.
- Domestic and occasional international travel is required.

Requirements of the Aerospace Flight Test Engineer:

- Bachelor degree or equivalent combination of work experience. - Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
- 5+ years relevant work experience related to experimental flight test operations.
- Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
- Strong ability to analyze results
- Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
- Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
 
Job Number: Flight Test Engineer
Job Location: Seattle, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 year contract, or direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262

Description:
GNC Aerospace Engineer ( Gilbert, AZ ) 6954262
12+ Month Contract


Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware. This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.

Looking for satellite experience, launch vehicle, UAV and aircraft is acceptable if their related experience is with GNC hardware component. Without the GNC hardware component experience that’s a show stopper for the candidate. 5 – 8 years of experience is good

Required Capability:
Must have hardware electrical Perl background.
Additional Capability: Knowledge of Matlab & Simulink is a plus.
 
Job Number: 6954262
Job Location: Gilbert, AZ
Rate: open
Per Diem: Split
Overtime: Yes
Duration: 12 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV

Description:
Support Equipment Design Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Ground Support Equipment (GSE) experience is required.
** Creo experience is required **
** 10+ years experience and a Bachelors Degree or equivalent are required **
**(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
-Must be an experienced engineer with knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

Education:
-Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
-Experience in Design and Manufacturing is a must.

Skills Required:
GROUND SUPPORT EQUIPMENT CREO AEROSPACE
 
Job Number: 8235
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic/Mechanical Design Engineers in WA State

Description:
Keltia Design Inc. is a technical services company providing training, engineering design, and a broad range of recruiting services to customers in the Aerospace industry on a permanent and contractual basis.

Our client designs and manufactures complex actuation systems for both small and large aircrafts. We are looking for aerospace designers that have designed actuators and valves and are familiar with hydraulics as it applies to aircraft applications.

Program and design responsibilities, including the accountability for and development of new design configurations, including interfacing with customers, writing proposals, planning and defining workload, leading the design team, interfacing with manufacturing, vendors, qualification test.

Drive engineering design and development process improvements. Lead design reviews and approve design and analyses.
Team member in marketing efforts and business development. Interface with customers, evaluate RFQ’s, write technical proposals, and develop NRE cost.

Requirements:
BSME, BSAE, w/ 5 or more years’ experience as follows:
Aerospace hydraulic component design. Primary, secondary, or utility components. Design and development of hydro-mechanical and electro-hydraulic components including actuators and flow-control valves.
Experience in component design layout and modeling, detail design and drafting per ASME Y14.5, analysis, and qualification test. Understanding of manufacturing and assembly methods.
Working knowledge of aircraft systems and the effects of hydraulic components on system operation and performance.
Knowledge of industry design practices to predict component reliability, working knowledge of reliability analysis, fault-tree analysis, FMEA, FMECA, durability analysis, damage tolerance analysis, and wear analysis.
Familiarity w/ stress analysis, FEA, fatigue analysis, non-linear strain analysis, tolerance stackups, performance analysis, weight analysis, vibration analysis, thermal analysis, corrosion control, and material and process control.
Excellent writing, presentation, communication, and organizational skills. Ability to investigate, diagnose and resolve complex technical problems and communicate in clear simple terms.
Self-motivated with above average drive and endurance.
 
Job Number: HMD010418
Job Location: Everett, WA
Rate: 55-65/hr
Per Diem: yes
Overtime: possible
Duration: LT- 1yr+
Start Date: soon
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Mary Arneson
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Fluid Systems Propulsion/Mechanical Contract

Description:
IFS (Integrated Fluid Systems) Propulsion/Mechanical Contract

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Job Description
1. Contract Labor job description
a. Required: Mechanical or Aerospace engineering degree (BS) or equivalent
b. Required: Experience in the design, operation and/or control of pneumatic systems or cryogenic fluid systems that are used to transfer liquid nitrogen, liquid oxygen, liquid hydrogen and/or liquid natural gas.
c. Required: Experience working in a team environment
d. Required: Excellent communication skills
e. Optional: Experience in testing and debugging software
f. Optional: Experience with launch vehicle design and/or operation
g. Optional: Experience with developing requirements/procedures for automated operations
2. Expected deliverables
a. The following are the deliverables in support of the Common Avionics Integrated Fluid Systems Development and Qualification:
i. Verification that the ground system software meets all operational requirements for the Propulsion Systems
ii. Real time troubleshooting where software deficiencies are detected during system simulations conducted with the software team
 
Job Number: 8434
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER - SOLIDWORKS/UGNX - HYDRAULIC ACTUATORS - AEROSPACE/DEFENSE

Description:
Johnson Service Group (JSG) is searching for a Mechanical Engineer, responsible for complex product/system design of actuation systems.

Highly desired experience includes technical guidance to assure the performance of hydraulic actuation components for commercial aerospace applications. 

Summary of Job Scope:

-4-8 years of related mechanical design engineering experience.
UGNX and/or SolidWorks experience is required. 
-Knowledge of hydraulic and /or pneumatic systems for Aerospace -Commercial and Defense products is a plus.
-Product Lifecycle (PLC) process knowledge is a plus.
-Hands-on Finite Element Analysis (FEA) experience is a plus, but not required.
-Involved in all engineering aspects of several complex and detailed projects, which may include project management as well as engineering tasks.
-Solves in-depth engineering problems and communicates solutions to other engineers, sales development and management.
-Promotes and implements process improvements. 
-Independently troubleshoots/analyzes system problems using complex computer modeling and simulations.
-Will interact with engineers, technicians, drafters, and/or designers on a project level basis.
-Evaluate components of a complex systems and provide solutions.
-Understanding of component functions and testing requirements, as well as the relationship to system interaction and validation.
-Strong understanding of manufacturing processes, drawings and geometric tolerances as well as shop standards and procedures and how they impact design.
-Provides necessary guidance for proper analysis, with the ability to verify the validity of analysis.

Education:

Bachelor’s Degree in Mechanical Engineering or a similar technical discipline  

Duration: 18-month contract position  

Compensation:  Excellent compensation 

Location:  Duarte, CA  
 
Job Number: 362879
Job Location: Duarte, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 18 months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Jay Kerrigan
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Bachelors degree in aerospace or mechanical engineering - Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer - Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage). - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as Catia V5, Smarteam, Word, Excel)
 
Job Number: G855
Job Location: Savannah, GA
Rate: $68.00/Hrly
Per Diem: Split
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Barb McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technology Engineer 4

Description:
Mfg Technology Engineer 4

Location: New Orleans, LA
Duration: 12 Months

Job Description:
The Client Company is seeking an experienced Manufacturing Technology Analyst (Lift/Move Engineering) for New Orleans, Louisiana. This position will support the NASA Space Launch Systems Core Stage and Exploration Upper Stage (EUS) production based at the NASA Michoud Assembly Facility. The Michoud Assembly Facility is the home of the production program for the core stage of the Space Launch System.

The ideal candidate will have the following responsibilities:
Gather and support the evaluation of technical data for specific projects requiring lifting/moving of large aerospace structures;
Participate or manage lifting/movement projects using approved client/NASA techniques;
Initiate changes to supporting processes and related documentation;
Provide low-level training on lifting procedures and processes related to movement of production hardware;
Provide technical assistance to meet regulatory, production and process requirements concerning lifting/movement of flight hardware;
Communicate with internal stakeholders to ensure products and services compliance; Must have the ability to generate lift and move documentation.
Work under general supervision.
Communicates with internal/external stakeholders to ensure products and services meet requirements.

Education / Experience:
Bachelor's degree and typically 10 or more years’ related work experience, a Master’s degree and typically 8 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 18-00169
Job Location: New Orleans, LA
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: 1/19/2018
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Scheduler

Description:
Several experienced Master Schedulers needed for long term contract assignments in El Segundo, CA.

This position is for a Principle Planner / Scheduler development of an Integrated Master Schedule (IMS) based on requirements provided by the customer as part of a Request For Proposal (RFP); development of a DID and DCMA compliant, executable IMS after contract award; resource loading the IMS prior to an Integrated Baseline Review (IBR) that demonstrates thorough cost and schedule integration; and detail planning and maintenance throughout the program’s lifecycle that incorporates contractual and programmatic changes into the IMS in order to maintain realistic, current contract schedule baselines. In addition the position will require detailed analysis of the IMS and supporting documents to ensure quality, completeness and compliance. The weekly and monthly business rhythms will require communication (electronically and verbally) of schedule status including but not limited to, results of critical path analysis, schedule risk analysis (SRA), schedule variance analysis and the results of ‘what if’ exercises to the Program Manager, the customer and potentially to senior management.

Other duties will include: assisting with the development and maintenance of the Program Master Phasing Schedule and Integrated Master Plan (IMP)

• Ideal candidate will have minimum of 8 years of professional work experience, which includes at least 3 years of scheduling experience in an engineering/manufacturing environment (preferably aerospace). The candidate must be thoroughly familiar with the tenants of scheduling in an Earned Value Management environment.


Required Skills:

• Minimum 8 years of professional experience in Accounting, Finance, Program Management or Program Planning & Scheduling
• Minimum 3 years of scheduling experience in an engineering/manufacturing environment (preferably aerospace)
• Demonstrated experience in using MS Office suite products (MS Word, Excel, PowerPoint, etc.)
• Demonstrated Microsoft Project experience (or similar project scheduling software)
• The ability to interface and influence at all levels of an organization
• Strong communication skills, both verbal and written
• The ability to thrive in a deadline-oriented environment
• Demonstrated knowledge of the Earned Value Management System (EVMS) or similar business process
• Demonstrated knowledge and experience in assisting Integrated Product Teams (IPTs) in planning, scheduling and cost estimating
 
Job Number: 40362
Job Location: El Segundo, CA
Rate: GREAT $$$
Per Diem: yes
Overtime: posseible
Duration: 12 mos
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Designer

Description:
NX Designer

Location: Centennial, CO
Pay Rate: DOE
Duration: 6-8 month W2 contract with opportunity for extension
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Description:
-Proficiency with NX is required.
-Mechanical or Aerospace engineering BSME with 2 yrs min experience,
-efficient with part & assembly layout/ modeling capabilities using NX (V10),

Tasks could include:
-General model management
-Drawing creation/support
-Secondary hardware design
-Line routing and layout of secondary attach hardware (Structural, Avionics, Ordnance, Propulsion)
-Efficient with Geometric Dimensioning & Toleranceing
-Able to coordinate with other technical disciplines (Design, Strength, Avionics, Propulsion) and impacted sites (Production, Test House, etc.) to ensure final design meets all requirements.
-Proficiency with NX is required.
-6-8 months with opportunity for extension

Requirements:
-Bachelor degree in Mechanical or Aerospace engineering
-2+ yrs engineering/design experience
-Proficiency with NX is required; version 10 highly preferred
-Efficient with Geometric Dimensioning & Toleranceing
 
Job Number: 8446
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Scheduler

Description:
Program Scheduler
Stennis Space Center, MS
Rate: $28-$30

Duties: Schedule various programs and production activities into one cohesive integrated master schedule. Use Oracle MPS/MRP to drive time-phased material / resource requirements and inter-site demand. Provide management with a clear critical path to deliveries and report bottlenecks and constraints.
Skills: Required:
MS Project
APICS certification preferred
ERP/MRP experience
Production Scheduling or Capacity Planning experience

Desired: Aerospace environment (scheduling or planning)

Education: Bachelors Degree
 
Job Number: 8214
Job Location: Stennis Space Center, MS
Rate: $28-$30
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Sacramento, CA
Rate: $45.00 - $50.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

**Candidates MUST be available for IN PERSON interview**

Duties:
- Position reports directly to the program office for a NASA program with daily schedule demands.
- Duties include supporting program office, manufacturing and quality organizations as a Project Engineer for 4 rocket motors to be delivered for flight and qualification in 2018.
- Support is specific to each motor and includes daily preparing, updating and tracking to a detailed schedule, hosting a daily 7am schedule meeting with the customer, insuring actions are assigned and closed each day, and driving non-conformances through engineering and disposition.
- In addition, individual may support the Program Manager with program oversight, special projects and issues resolution, as required.


Skills:
- Position requires familiarity with aerospace manufacturing/quality processes, MS Outlook, MS Project and MS Excel.
- Experience with other space or defense programs is a plus.
- Skills include the ability to get work done through other organizations using a detailed schedule to drive progress and in a positive, encouraging manner.
- Individual should be solution oriented so that paths to issue resolution are sought and closed.
- Desired skills include nonconformance closure experience and a working knowledge of engineering design processes.
- Manager is looking for someone with prior aerospace experience in an engineering/manufacturing environment and the drive to get things done in a positive manner.


Education:
BS in Mechanical Engineering or equivalent
 
Job Number: 8484
Job Location: Sacramento, CA
Rate: $45.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer CA

Description:
7550845
Job Title: Project Engineer

Number of Positions: 1

Remaining Positions: 1

Duties:
Position reports directly to the program office for a NASA program with daily schedule demands. Duties include supporting program office, manufacturing and quality organizations as a Project Engineer for 4 rocket motors to be delivered for flight and qualification in 2018. Support is specific to each motor and includes daily preparing, updating and tracking to a detailed schedule, hosting a daily 7am schedule meeting with the customer, insuring actions are assigned and closed each day, and driving non-conformances through engineering and disposition. In addition, individual may support the Program Manager with program oversight, special projects and issues resolution, as required.



Skills:
Position requires familiarity with aerospace manufacturing/quality processes, MS Outlook, MS Project and MS Excel. Experience with other space or defense programs is a plus. Skills include the ability to get work done through other organizations using a detailed schedule to drive progress and in a positive, encouraging manner. Individual should be solution oriented so that paths to issue resolution are sought and closed. Desired skills include nonconformance closure experience and a working knowledge of engineering design processes. Manager is looking for someone with prior aerospace experience in an engineering/manufacturing environment and the drive to get things done in a positive manner.







Education:
BS in Mechanical Engineering or equivalent


Skills:
Required
AEROSPACEENGINEERENGINEERING DESIGNEXCELMS EXCEL
Additional
MS OUTLOOKMS PROJECTOUTLOOKPROGRAM MANAGERPROJECT ENGINEERQUALITY PROCESSESBODY ENGINEERINGMECHANICAL ENGINEERINGMICROSOFT PROJECTNASA
Languages:
English( Speak, Read, Write )
Minimum Degree Required: Bachelor's Degree

State/Province: California
City/Town: Sacramento

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 07/27/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Days Per Week: 5.00
 
Job Number: MB-7550845
Job Location: Sacramento, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager III Technical ( Plymouth, MN ) 7851097

Description:
Project Manager III Technical ( Plymouth, MN ) 7851097
5 month plus contract

Pay rate: $50 - 75 /hr depending on experience


**Will develop special test equipment. Need asst. tracking projects and scheduling tasks (juggling ~15 programs.) Will use a system to help manage workloads/deadlines.
Will Set up the Master Project Plan. Bachelors is important (Electrical Eng.) Labview exp key, PMP Cert REQUIRED.
Military exp is helpful. Should have exp in a relevant industry.
Will need to meet basic quals. listed below. In interview, will ask about exp w/ tools listed below.
Will ask if have designed electrical circuit boars, use of tools, and level of knowledge.
Will ask about Labview - installation, programming, and architecture. If have military exp, will ask about results achieved.

Program team consists of ~9 test eng. supporting ~12 programs at a time. Will report to Dir. of Eng and get direction from a Prog. Mgr.**

Creates, maintains, and tracks projects for special electronic and guidance subsystem test equipment. Ensures project content is delivered on-time and within budget. Assembles a resource-loaded master schedule for all projects in the special test equipment team and identifies recommended actions for resources and schedule. Prepares reports for upper management regarding status of projects.

Required qualifications:
Bachelor's degree
PMP certification
2 years experience as a project manager or program manager
U.S. citizen

Preferred qualifications:
Bachelor's degree in Electrical Engineering
5 years experience as a project manager or program manager
Experience as non-commissioned officer in the military
Experience in LabView programming
Experience managing projects in the aerospace or defense industries
Ability to travel 10-25% of the time within the US for launch events
 
Job Number: 7851097
Job Location: Plymouth, MN
Rate: 75
Per Diem: Split
Overtime: YEs
Duration: 5 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Analysis Engineer (Centaur V)

Description:
Propulsion Analysis Engineer (Centaur V)

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**
Job Description
Performs fluids analysis at both the detailed component level and at the systems level. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products, Matlab, SINDA/FLUINT, and Flow3D.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8436
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Analysis Engineer (HCS)

Description:
Propulsion Analysis Engineer (HCS)

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**
Job Description
Performs fluids analysis at both the detailed component level and at the systems level. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available
Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products (AFT Fathom, Impulse, and Arrow), Matlab, SINDA/FLUINT, Flow3D, Excel, and Visual Basic.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8437
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Eng II

Description:
UNIQUE SKILLS
Proficient with Catia, Smarteam and Solumina preferable

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

POSITION PURPOSE
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Develop quality control methods required for the product or service of the area.
2. Prepare department procedures and instructions as required to implement quality control requirements.
3. Review Test and Assembly Documentation. Review new and revised Blue Prints.
4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
7. Perform miscellaneous special assignment assigned by group leader or supervisor.
8. Write and review both internal and external Corrective Actions.
9. Follow-up on Corrective Action implementation.
10. Participate in and lead audits and improvement workshops.
11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes
13. Maintain a high level of customer satisfaction (internal and external customers).
14. Work with other departments and/or disciplines.
15. Execute company policies and procedures; develop new procedures as required.
16. Promote and encourage a continuous improvement culture.

ADDITIONAL FUNCTIONS
1. Work with other departments and/or disciplines.
2. Execute company policies and procedures; develops new procedures as required.
3. Support the operating priorities as identified by the Quality leadership team.
4. Perform other duties as assigned.

OTHER REQUIREMENTS
1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
4. Ability to define problems, collect data, establish facts, and draw valid conclusions.
5. Working knowledge of Statistical tools used for problem resolution.
6. Lean/Six Sigma experience or greenbelt preferred.
7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 17-800-119139
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Eng II

Description:
UNIQUE SKILLS
Position will be located in Flight Test area Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred. Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner. Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review. Current GAC Quality MRB authority a plus. Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification. Will provide ancillary support for flight test as needed to support flight operations

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

POSITION PURPOSE
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Develop quality control methods required for the product or service of the area.
2. Prepare department procedures and instructions as required to implement quality control requirements.
3. Review Test and Assembly Documentation. Review new and revised Blue Prints.
4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
7. Perform miscellaneous special assignment assigned by group leader or supervisor.
8. Write and review both internal and external Corrective Actions.
9. Follow-up on Corrective Action implementation.
10. Participate in and lead audits and improvement workshops.
11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
13. Maintain a high level of customer satisfaction (internal and external customers).
14. Work with other departments and/or disciplines.
15. Execute company policies and procedures; develop new procedures as required.
16. Promote and encourage a continuous improvement culture.

ADDITIONAL FUNCTIONS
1. Work with other departments and/or disciplines.
2. Execute company policies and procedures; develops new procedures as required.
3. Support the operating priorities as identified by the Quality leadership team.
4. Perform other duties as assigned.

OTHER REQUIREMENTS
1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
4. Ability to define problems, collect data, establish facts, and draw valid conclusions.
5. Working knowledge of Statistical tools used for problem resolution.
6. Lean/Six Sigma experience or greenbelt preferred.
7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
8. Excellent communication and interpersonal skills required.
9. Proficient computer skills.
 
Job Number: 17-801-117825
Job Location: Southeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer - Aerospace

Description:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:

A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.
 
Job Number: G826
Job Location: Savannah, GA
Rate: $55.00/Hrly
Per Diem: Split
Overtime: Possible
Duration: Open
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Barb McGraw
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term contract position

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Proficient in Catia, Smarteam and Solumina preferred.

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:
Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8447
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract (1 – 4 years)


Unique Skills:
Proficient with Catia, Smarteam, and Solumina preferable

Education and Experience Requirements:
Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:
Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8306
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Quality Assurance Engineer II

Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract (1 – 4 years)


Unique Skills:
Position will be located in Flight Test area. Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred. Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner. Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review. Current GAC Quality MRB authority a plus. Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification. Will provide ancillary support for flight test as needed to support flight operations

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:

Essential Functions: 1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements. 3. Review Test and Assembly Documentation. Review new and revised Blue Prints. 4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions. 12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes. 13. Maintain a high level of customer satisfaction (internal and external customers). 14. Work with other departments and/or disciplines. 15. Execute company policies and procedures; develop new procedures as required. 16. Promote and encourage a continuous improvement culture.

Additional Functions: 1. Work with other departments and/or disciplines. 2. Execute company policies and procedures; develops new procedures as required. 3. Support the operating priorities as identified by the Quality leadership team. 4. Perform other duties as assigned.

Other Requirements: 1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 4. Ability to define problems, collect data, establish facts, and draw valid conclusions. 5. Working knowledge of Statistical tools used for problem resolution. 6. Lean/Six Sigma experience or greenbelt preferred. 7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.). 8. Excellent communication and interpersonal skills required. 9. Proficient computer skills.
 
Job Number: 8305
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Position Purpose:
• A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities.
• Ensures a safe, conforming and quality product is delivered to our customers.

Unique Skills:
• Position will be located in Flight Test area Experienced in providing support for issues related to Flight Test operations by partnering with all relative stakeholders such as engineering, procurement, and FT operations is highly preferred.
• Must be able to liaison with aircraft QC, MRB and supplier to ensure all repair documentation is submitted in a timely manner.
• Required to be proficient in Solumina, including experience reviewing provided documentation prior to sending to MRB engineering for review.
• Current Quality MRB authority a plus.
• Must be able to coordinate with applicable groups for Flight Test parts returned to vendor for repair/modification.
• Will provide ancillary support for flight test as needed to support flight operations

Education and Experience Requirements:
• Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
• Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required.
• Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation.
• Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develops new procedures as required.
• Support the operating priorities as identified by the Quality leadership team.
• Perform other duties as assigned

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
• Excellent communication and interpersonal skills required.
• Proficient computer skills.
 
Job Number: 24-217
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Position Purpose:
• Develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities.
• Ensures a safe, conforming and quality product is delivered to our customers.

Unique Skills:
• Proficient with Catia, SmarTeam and Solumina preferable

Education and Experience Requirements:
• Bachelor’s degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
 
Job Number: 24-218
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector-Aerospace Flight Test

Description:
The Quality inspector inspects the Aircraft and signs a release for flight.

Job Duties and Responsibilities:
• Carry out physical inspections on Flight Test Aircraft to identify damage or defects and to assess airworthiness and conformance to standards.
o Sign the release for flight form on aircrafts that pass Quality Inspection.
o Analyze information and evaluate results to choose the best solution and solve problems.
• Observe and certify conformity with system tests.
• Carry out daily audits related to shop floor practices or specific Quality System elements.
• Prepare and audit Aircraft documentation such as Technical logs.
• Administer non-conformance reports and snag reports.
• Conduct Authority audits with QA organization as needed.
• Perform Nondestructive testing (NDT) as needed.
• Complete special projects and miscellaneous tasks as assigned by manager.

Level Requirements:
Education:
Degree, specification
• College degree or equivalent work experience
• A&P license
Preferred qualifications
• NDT certification

Experience:
• 10 + years of experience in AC release as a Quality Inspector in Experimental Flight Testing or maintenance or pre-flight.
• Experimental experience preferred from other field of experience.
 
Job Location: Moses Lake, WA
Rate: DOE
Per Diem: Split- Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
RMS (Reliability, Maintainability, Safety) Engineer

Location: Fort Worth, TX
Pay Rate: $37.50/hr
Duration: 12 month W2 contract
Shift: First
Travel: Occasional travel between customer/suppliers and Company locations
**MUST be a U.S. CITIZEN**
**No Per Diem**

Description:
-The RMS engineer is responsible for generating and coordinating all required RMS analyses and documentation in support of the certification effort of Landing Gear System on a new aircraft and continued airworthiness of in-service aircraft.
-Required documentation includes but is not limited to: RMS Program Plans, Reliability Predictions, Failure Mode Effects Analysis / Summary (FMEA / FMES), Fault Tree Analysis (FTA), (Preliminary) System Safety Analysis ((P)SSA), Common Cause Analysis (Particular Risks, Common Mode Analysis, Zonal Analysis), Dispatch Reliability Analysis, MSG-3 Analysis, Maintainability Plans and Analyses, Direct Maintenance Cost (DMC) Analysis, etc.
-In addition, the RMS Engineer is engaged with the Chief Engineer’s Office and supports the RMS aspect of R&D programs, as required.
-The engineer will maintain current and work on preparation of new RMS engineering manuals.
-This position works directly with the Customer. Occasional on-site support and travel will be required.
-Integration with the New Product Introduction (NPI) and in-production engineering groups is a must and, therefore, strong communication skills and team work is strongly desired.

Primary Responsibilities of this role include:
◦Provide support to the Project Head for all RMS related tasks which encompass:
◦Review proposals
◦Prepare, coordinate and execute RMS Program Plans
◦Prepare / review RMS documentation as listed above
◦Approve Engineering Dwg’s
◦Prepare and support Design Reviews as required
◦Support Landing Gear product improvements
◦Revise / prepare RMS Engineering Manuals
◦Perform RMS Analyses on R&D projects
◦Maintains compliance to ITAR and regulatory requirements

Requirements:
◦ Bachelors degree or higher required
◦ 4-6+ years of RMS experience
◦ Landing gear/hydraulic experience in the aerospace industry
◦ Excellent communication skills and ability to travel

Additional - executes RMS activities including:
•Foster strong customer relationships through accountability, transparency and credibility
•Responsible and accountable for all Landing Gear RMS tasks and its completion dates
•Communicates progress and roadblocks with the Project Head
•Provide RMS input to Landing Gear designers and Project Head to help ensure system compliance with customer requirements
•Utilize ACE Standard Work Tools to facilitate execution for RMS related tasks
•Supports Engineering investigations into failures and participates in Root Cause and Corrective Action •Occasional travel between customer/suppliers and Company locations.
•Support development of Landing Gear cultural initiatives through the use of Company 4-gears philosophies
•Perform other duties as required
•Must comply with all site EH&S policies and procedures
 
Job Number: 8441
Job Location: Fort Worth, TX
Rate: 37.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Composite Design Engineer

Description:
NX experience is preferred. But Creo is acceptable **

Under limited general direction and following established policies, the Senior Engineer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for composite structures. Composite structures design activities include strategic booster motor composite cases, tactical rocket motor cases, composite armaments, composite over-wrapped pressure vessels, and composite flight structures. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment. Work is reviewed by senior staff.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports


-Possible travel to Sacramento, CA and or GD Lincoln, NB. Trips typically three to four days at a time. Likely one trip per month depending upon activity.

-Composite Design Engineering and Composite Design Manufacturing experience required.
-Experienced with composite structure preliminary sizing tools and FEA tools/methods preferably related to Composite Motor Cases/Pressure Vessels.
-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.
-Experienced in 3D modeling and 2D drawings.
-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Keywords:
-Composite, Composite Design, Composite Engineer, Composite Structures
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
-An advanced engineering degree is a plus.
 
Job Number: 7544355
Job Location: Huntsville, AL
Rate: DOE
Duration: 12
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Composite Design Engineer

Description:
Location: Huntsville, AL
Rate: $40.00 - $44.00/HR
Duration: 9 month contract position
Shift: 9/80 Schedule – OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Under limited general direction and following established policies, the Senior Engineer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for composite structures. Composite structures design activities include strategic booster motor composite cases, tactical rocket motor cases, composite armaments, composite over-wrapped pressure vessels, and composite flight structures. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment. Work is reviewed by senior staff.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports

-Possible travel to Sacramento, CA and or GD Lincoln, NB. Trips typically three to four days at a time. Likely one trip per month depending upon activity.


Skills:
-Composite Design Engineering and Composite Design Manufacturing experience required.
-Experienced with composite structure preliminary sizing tools and FEA tools/methods preferably related to Composite Motor Cases/Pressure Vessels.
-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E. NX experience is preferred, but Creo is acceptable.
-Experienced in 3D modeling and 2D drawings.
-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Keywords:
-Composite, Composite Design, Composite Engineer, Composite Structures

Education:
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
-An advanced engineering degree is a plus.
 
Job Number: 8460
Job Location: Huntsville, AL
Rate: $40.00 - $44.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Composite Design Engineer / NX or CREO AL

Description:
7544355

Job Title: Senior Composite Design Engineer
44/hr max

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** NX experience is preferred. But Creo is acceptable **



Under limited general direction and following established policies, the Senior Engineer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.



60% - Lead mechanical design activities for composite structures. Composite structures design activities include strategic booster motor composite cases, tactical rocket motor cases, composite armaments, composite over-wrapped pressure vessels, and composite flight structures. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment. Work is reviewed by senior staff.



20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.



10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.



10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports





-Possible travel to Sacramento, CA and or GD Lincoln, NB. Trips typically three to four days at a time. Likely one trip per month depending upon activity.



Skills:
-Composite Design Engineering and Composite Design Manufacturing experience required.

-Experienced with composite structure preliminary sizing tools and FEA tools/methods preferably related to Composite Motor Cases/Pressure Vessels.

-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.

-Experienced in 3D modeling and 2D drawings.

-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.



Keywords:

-Composite, Composite Design, Composite Engineer, Composite Structures

Education:
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.

-An advanced engineering degree is a plus.


Skills:
Required
AEROSPACE DESIGNCREOSIEMENS
Additional
Languages:
English( Speak, Read, Write )
Minimum Degree Required: Bachelor's Degree

State/Province: Alabama
City/Town: Huntsville

Start Date: 01/22/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-7544355
Job Location: Huntsville, AL
Rate: 44/hr max
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solid Propulsion Design Engineer

Description:
NX experience is preferred. But Creo is acceptable **

Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.


Possible travel to Sacramento, CA, Camden AR, and/or Culpeper, VA. Trips typically three to four days at a time. Likely one trip per month depending upon activity.
-Solid Propellant Motor Design and Manufacturing experience preferred.
-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.
-Experienced in 3D modeling and 2D drawings.
-Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.
-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Keywords:
Propulsion, Solid Motor Propulsion, Rocket Motor, Controllable Solids, SDACS, TDACS,
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
-An advanced engineering degree is a plus.
 
Job Number: 7643652
Job Location: Huntsville, AL
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solid Propulsion Design Engineer

Description:
Location: Huntsville, AL
Rate: $40.00 - $44.00/HR
Duration: 9 month contract position
Shift: 9/80 Schedule - OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Possible travel to Sacramento, CA, Camden AR, and/or Culpeper, VA. Trips typically three to four days at a time. Likely one trip per month depending upon activity.

Skills:
-Solid Propellant Motor Design and Manufacturing experience preferred.
-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E. NX experience is preferred, but Creo is acceptable.
-Experienced in 3D modeling and 2D drawings.
-Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.
-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Keywords:
Propulsion, Solid Motor Propulsion, Rocket Motor, Controllable Solids, SDACS, TDACS,

Education:
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
-An advanced engineering degree is a plus.
 
Job Number: 8459
Job Location: Huntsville, AL
Rate: $40.00 - $44.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solid Propulsion Design Engineer AL

Description:
Job Title: Senior Solid Propulsion Design Engineer

Number of Positions: 4

Remaining Positions: 4

Duties:
** Candidates must be U.S. Citizens **



** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** NX experience is preferred. But Creo is acceptable **



Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.



60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.



20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.



10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.



10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.





Possible travel to Sacramento, CA, Camden AR, and/or Culpeper, VA. Trips typically three to four days at a time. Likely one trip per month depending upon activity.

Skills:
-Solid Propellant Motor Design and Manufacturing experience preferred.

-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.

-Experienced in 3D modeling and 2D drawings.

-Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.

-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.



Keywords:

Propulsion, Solid Motor Propulsion, Rocket Motor, Controllable Solids, SDACS, TDACS,

Education:
-Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.

-An advanced engineering degree is a plus.


Skills:
Required
AEROSPACE DESIGN CREO SIEMENS

State/Province: Alabama
City/Town: Huntsville

Start Date: 01/22/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Schedule. OT possible Days Per Week: 5.00
 
Job Number: MB-7643652
Job Location: Huntsville, AL
Rate: 44/hr max
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV AL

Description:
7540132

Job Title: Specialist Systems Engineer IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



**Candidates must have focused Systems Engineering Implementation on hardware product development teams **



** The best candidate would have Systems Engineering experience with hardware development (esp. aerospace and rockets), with roles that mostly involve managing requirements and risk, and interface control. Key experiences and Key words to search for would include DOORS, INCOSE, CSEP(Certified SE Professional), and even SysML and MBSE (Model Based Systems Engineering) **





-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.

-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems. -Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.

-Represents the organization in conferences to resolve important questions and to plan and coordinate work.

-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.

-Develops solutions to complex problems which require the use of ingenuity and creativity.

-Work is reviewed at extended intervals for desired results and achievement.

-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.



60% - Develops hardware and software requirements for solid, liquid, and electric rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in requirements database and specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.



15% - Performs functional analysis and coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.



15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.



10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (product development cycle requirements management, risk management, integration) for aerospace/rocket propulsion system design development.

-Experience with IBM Rational DOORS requirements management software.

-Experience with MicroSoft Access strongly desired.

-Must be eligible/able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Aerospace).

-Advanced degree desirable.

-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.

-Trained/experienced in IBM Rational DOORS, Microsoft Office.


Skills:
Required
AEROSPACE SYSTEMS ENGINEERINGDOORS SOFTWAREREQUIREMENTS MANAGEMENTRISK MANAGEMENT


State/Province: Alabama
City/Town: Huntsville

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 07/29/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-7540132
Job Location: Huntsville, AL
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Solid Propulsion Design Engineer

Description:
Senior Solid Propulsion Design Engineer

Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.

Possible travel to Sacramento, CA, Camden AR, and/or Culpeper, VA. Trips typically three to four days at a time. Likely one trip per month depending upon activity.
Skills: -Solid Propellant Motor Design and Manufacturing experience preferred.
-Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.
-Experienced in 3D modeling and 2D drawings.
-Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.
-Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

Education: -Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
-An advanced engineering degree is a plus.
 
Job Number: CA40243
Job Location: Huntsville, AL
Rate: Up to $44.00
Per Diem: Yes
Overtime: Possble
Duration: 8 mos +
Start Date: 01/22/18
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Design Engineer - no C2C

Description:
Johnson Service Group (JSG) is searching for a talented contract Sr. Electrical Design Engineer with circuit level analysis and design experience.

We are seeking a senior electrical with a background in Aerospace, Automotive, Defense and related products/applications.

Summary of Job Scopes:

4-6+ years of electrical engineering experience, focused on circuit level analysis and design, mixed signal, and sensor integration.
Must be proficient with Mentor Graphics DxDesigner.
Layout of high complex hardware boards and derivatives.
Ability to run existing standard tools (e.g. layout tools, circuit analysis, dynamic simulation, etc.).
Proficient knowledge of engineering quality systems, including PLC, engineering change, configuration management, etc.
Solid understanding of component function and testing requirements.
Education: BS Degree in Electrical Engineering or a related technical discipline.
 
Job Number: 362234
Job Location: Niles, IL
Rate: DOE
Per Diem: yes
Overtime: possible
Duration: 3 to 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Control Engineer

Description:
Simulation and Flight Control Law Development Experience. Knowledge of aircraft and aerospace systems with emphasis on flight dynamics. Knowledge of reversible and irreversible flight control systems. Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran


The Structures Company is an AA/EOE.
 
Job Number: 160
Job Location: CA
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Electrical Engineer - No C2C

Description:
Johnson Service Group (JSG) is searching for a Staff Systems Electrical Engineer, capable of leading the design and development of main engine controls, including Full Authority Digital Engine (or electronics) Control (FADEC). This critical role will support the digital engine control design and development for Commercial and Defense aircraft turbine engines.

The Staff Systems Electrical Engineer is responsible for support of system development, leadership support, collaboration and process improvement, including Product Lifecyle (PLC) Management.

Summary of Job Scopes:

8-10+ years of related electrical engineering experience, ideally with a background in electronics or software design, within the Aerospace and Defense industries.
Will lead System Requirements Definition and Partitioning and flow down from higher level system to LRU components.
Will derive the requirements from the analysis of the primary system and establishes acceptance criteria for these requirements.
Able to resolve and negotiate requirement conflicts in order to establish a complete and consistent requirement set for the system.
Responsible for system verification and validation, including test plan writing.
Ability to drive System Architecture Definition and Design implementation, as well as System/Component Interface Management.
Motion Control Simulation/Analysis experience, including MATLAB SIMULINK or similar tools.
Familiarity with DOORS or similar Requirements management and Traceability tools.
Familiarity with Aerospace industry and the product development processes, including ARP4754, DO-178, DO-254, etc.

Education:

Bachelor's Degree in Electrical Engineering or a similar technical discipline
Master's Degree in Electrical Engineering or a similar technical discipline is a plus
Type of employment: Full time salaried position

Location: Chicago, IL
 
Job Number: 361925
Job Location: Chicago, IL
Rate: $125k/yr
Per Diem: no
Overtime: possible
Duration: Direct Hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****

*****MUST have ABAQUS, CATIA V5, and Landing Gear or Hydraulic Systems Experience*****

*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to UTC engineering methodologies

Requirements:
• Bachelor's degree or equivalent in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8465
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to UTC engineering methodologies

Requirements:
• Bachelor's degree or equivalent in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Person status.
 
Job Number: 8290
Job Location: Independence, OH
Rate: $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers - Many Needed **HOT**

Description:
Stress Engineers - Must have Active Secret Clearance and recent investigation date within 5 years.
*Three years minimum experience in the analysis of aerospace structures. Experience in the analysis of composite structures is required.
*Preferred: Experience in NX, Team Center, MSC Analysis Tools (Nastran, Patran, etc.) Analysis Tools (SasTools).

**Email resumes to: mmccarthy@pdstech.com
 
Job Number: Spirit-Stress
Job Location: Wichita, KS
Rate: Excellent
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $70.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Prefer candidates with stable work histories (are not “job hoppers”).
-Master’s degree strongly preferred.

The selected candidate will:
- Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
- Perform structural analyses utilizing class hand-calculation methods and finite element models.
- Construct and solve static and dynamic finite element models with ANSYS
- Participate in dynamic test planning and execution.
- Correlate structural models to test results.
- Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 8228
Job Location: Canoga Park, CA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.


The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 7877
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer - Composites

Description:
Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Duration: 1 year contract
9/80 Schedule
OT Possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.
-Experience with solid propellants or other viscoelastic materials.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.

The selected candidate will:
•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS
•Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.

Skills:
-Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Education:
-BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 8359
Job Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer - Composites ** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience ** CA

Description:
160837/7630372
Job Title: Structural Analysis Engineer - Composites
Sacramento CA
75/hr max
12 months
** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **


Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.

-Aerospace or Defense related experience preferred over airframe or aviation experience.

-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.

-Experience with solid propellants or other viscoelastic materials.

-Recent college grads are okay with at least some ANSYS experience.

-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).

-Master's degree strongly preferred.

The selected candidate will:

•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS •Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.
Skills: -Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
Keywords:
Education: -BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master's degree is strongly preferred.

Skills and Experience:
Required Skills:
AEROSPACE STRUCTURAL ANALYSIS
ANSYS
AEROSPACE

# of Positions: 3

Location:
Sacramento, CA
Hwy 50 and Aerojet Rd., 95670

Schedule:
Start Date: 01/02/2018
Estimated End Date: 12/21/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: 9/80 Schedule. OT possible.
 
Job Number: MB-7630372
Job Location: Sacramento, CA
Rate: 75/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer / no clearance / candidates with recent ANSYS Structural Analysis experience URGENT CA

Description:
160343/7441118

Job Title: Structural Analysis Engineer

Additional Information: Candidates needed! Manager is interviewing. Must have recent Aerospace structural analysis experience using ANSYS. See job description for other requirements.

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).

-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.



Number of Positions: 4

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).



-Prefer candidates with stable work histories (are not “job hoppers”).



-Master’s degree strongly preferred.



The selected candidate will:

Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.



Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as ANSYS is required.

-Knowledge and experience with aerospace product development efforts is desired.

-Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.



Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.

-Master’s degree is strongly preferred.

Skills:
Required

ANSYS AEROSPACE STRUCTURAL ANALYSIS FINITE ELEMENT ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 04/01/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7441118
Job Location: Canoga Park, CA
Rate: 65-75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer (NX10)

Description:
Structural Engineer (NX10)

Location: Centennial, CO
Pay Rate: DOE
Duration: 6 month W2 contract with potential for extension
Shift: not specified, likely First Shift
**MUST be a U.S. CITIZEN**

Skills Required:
-Mechanical or Aerospace engineering BSME with 2 yrs min experience,
-efficient with part & assembly layout/ modeling capabilities using NX (V10),
-efficient with Geometric Dimensioning & Toleranceing,
-Proficiency with NX is required.

Tasks could include:
-general model management,
-drawing creation/support,
-secondary hardware design,
-line routing and layout of secondary attach hardware (Structural, Avionics, Ordnance, Propulsion),
-able to coordinate with other technical disciplines (Design, Strength, Avionics, Propulsion) and impacted sites (Production, Test House, etc.) to ensure final design meets all requirements.
 
Job Number: 8479
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Test Engineer

Description:
General Summary:
 
The Engineer will perform activities associated with all areas of structural test, including but not limited to static, fatigue and dynamic test environments. Engineer will support a wide range of test projects, which will include small component test and large full scale assemblies.
 
Duties and Responsibilities:
 
Review Test Plans/Requirements and Coordinate with Stress Engineering, Systems Engineering, Purchasing, and Quality to prepare and ensure implementation of requirements for testing activities on various static and fatigue tests
Experience working with instrumentation sensors such as, Strain Gages, Load Cells, Pressure Sensors, Thermocouples, Extensometers and Displacement Transducers
Operate, maintain and support use of digital and analog data acquisition systems
Participate in Full scale aircraft test design concepts
Inspect 3D models and create documents for test setup
Assist with witnessing and conducting tests.
Supervise conformity effort for tests.  This includes creation and implementation of conformity documentation for testing - RFC's, work orders, test deviations, and resolution of squawks
Troubleshoot and resolve test setup issues and report out on status for assigned tests
Perform analysis for adequately size test hardware and write test reports
Create and implement solutions for conducting testing including fixture design and fabrication, and lead a group of technicians and peers for accomplishing tasks
Qualifications
 
Education, Work Experience, Certification and/or Licensure:
 
·       Mechanical, Aerospace, or related Engineering Bachelor Degree with 10+ years of relevant test experience supporting aircraft structures

Knowledge, Skills and Abilities:
 
CATIA V5, Microsoft Office, and Communication Skills
 
Notes
US Citizen, Or Greencard holder.
 
Job Number: 129
Job Location: NC
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract


****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Prior 2nd Shift experience desired.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8443
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV / Candidates needed with Ground Support Equipment DESIGN experience and Creo experience required URGENT CA

Description:
7610419/161126
Job Title: Support Equipment Design Engineer IV

Candidates needed with 5 to 10 years of Ground Support Equipment Design experience. The manager wants to clarify that this is a GSE Designer role, not a GSE Drafter role.


Number of Positions: 2

Remaining Positions: 1

Candidates should have Ground Support Equipment (GSE) experience.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 10+ years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.


Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.

Skills:
Required

GROUND SUPPORT EQUIPMENTCREOAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7610419
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer
East Aurora, NY
~12 month contract





SUMMARY or MAJOR FUNCTION OF THE JOB


The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.


JOB REQUIREMENTS
•Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
•Support the development of system level solution architecture with the assistance of senior level design and system engineers.
•Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This is to include definition of required test equipment.
•Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
•Participate in the integration and test of components and subsystems.
•Create concise reports and proposal write-ups that describe the design decisions and analysis results.
•Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.
•Represent the company in a manner consistent with its strong technical reputation.
•Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other company sites.

REQUIRED QUALIFICATIONS
•Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required◦An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.

•4 years of progressive experience in the field of Engineering is preferred.
•Proven general capabilities/competencies in Initiating Action, Customer Focus, and Building Strategic Working Relationships.
•Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: 52987
Job Location: East Aurora, NY
Rate: 55
Per Diem: Possible
Overtime: Possible
Duration: ~12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Duration: 1 year contract


Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 8031
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer / CREO2 3D CAD modeling skills with technical product design experience in liquid rocket / aerospace systems CA

Description:
7352963
Job Title: T3 Engine System Design Engineer

Duties: -Performs engine system level design tasks for liquid rocket engines.

-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills: -CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education: -Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.

Skills and Experience:

Required Skills:

CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
AEROSPACE SYSTEMS ENGINEERING
WINDCHILL

Additional Skills:

CAD
CAD SOFTWARE
DESIGN ENGINEER
ENGINEER
FABRICATION
PRODUCT DESIGN
SYSTEM LEVEL
SYSTEM LEVEL DESIGN
T-CARRIER
MACHINING
PTC
TEST SUPPORT
AEROSPACE
AEROSPACE SYSTEMS
ANALOG SILICON
AUTO CAD
CAD MODELING
ENGINES
LEVEL DESIGN
MECHANICAL ENGINEERING

Minimum Degree Required: Bachelor's Degree

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/31/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7352963
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Flight Controls Engineer CA

Description:
14497BR
Title TEMP Flight Controls Engineer
Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications •Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14497
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Flight Controls Engineer CA

Description:
14498BR
Title TEMP Flight Controls Engineer
Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications •Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14498
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Flight Controls Engineer MATLAB plus controls tool boxes • SIMULINK, C or C++ coding experience CA

Description:
14499BR
Title TEMP Flight Controls Engineer
Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications •Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14499
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Staff Flight Controls Engineer CA

Description:
14493BR
Title TEMP Staff Flight Controls Engineer
Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice as well as project and/or program leadership including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones. Must posses the ability to contribute to the development of new concepts and principles; resolve unusually complex technical problems; serve as spokesperson on projects and/or programs; and be a technical expert in one or more areas of engineering. Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work on a self-initiated basis and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to a national or international engineering symposium, and invited to Chair engineering review panels as a technical expert are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD.



•Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14493
Job Location: San Diego, CA
Rate: 40-70/hr
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Staff Flight Controls Engineer CA

Description:
14495BR
Title TEMP Staff Flight Controls Engineer
Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications •Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14495
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Staff Flight Controls Engineer MATLAB plus controls tool boxes • SIMULINK, C or C++ coding experience CA

Description:
160653/14496

Title TEMP Staff Flight Controls Engineer

Job Summary
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Primary responsibilities involve analysis of aided inertial navigation systems of various fidelities, including navigation and tactical grade Embedded GPS/INS, radar tracking/MEMS and precision landing systems such as JPALS. Applicant must be able to analyze navigation system performance in simulation, laboratory and flight testing, and resolve navigation system anomalies observed in simulation, lab, van and flight test. Duties also involve performing sensor trade studies and sensor selection, implementation of INS aiding and alignment methods, defining requirements and interface description, hardware characterization and testing, development of navigation algorithms and software, and characterization of navigation sensors for simulation models incorporating dynamics and environmental effects.

Qualifications include:


•Applied knowledge of navigation and tactical grade Inertial Measurement Units and Inertial Navigation System


•Experience developing or modifying Matlab, SIMULINK and C


•Experience in navigation design and performance analysis related to aerospace vehicles


•GPS and GPS augmentation methods


•Applied knowledge of optimal estimation techniques such as the Extended Kalman filter and unscented Kalman filters, and analysis of random processes.


•Experience using GPS both as a navigation aiding source and standalone


•Experience in the ways in which GPS can be compromised, degraded or jammed, and mitigation methods for these cases


•Experience in development of modeling and simulation tools, especially Covariance Analysis and Monte Carlo simulation


•Applied knowledge of various navigation sensor systems such as JPALS, Radar, differential GPS and MEMs IMUs.


•Experience working as part of a GNC team and understanding of the role navigation plays


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications •Demonstrates a detailed and extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.

•Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment; strong communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government representatives, and/or professionals; the capability of representing the organization as a prime technical contact; and, the ability to provide leadership and guidance to less experienced professionals.

•Must be customer focused and able to work on a self- initiated basis or in a team environment and able to work extended hours and travel as required.

•A Professional Engineering License, original work(s) published in professional engineering journals, invited to present one or more original works to an engineering symposium, and invited and/or participated on an engineering review panel are desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14496
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Technical Writer
Chula Vista, CA
6+ month contract

Our client is looking for a technical writer with 10+ years of experience, specifically in the aerospace industry. The ideal candidate will have experience with aerospace technical manuals including but not limited to illustrated parts catalogues, SRMs, and service bulletins.

Qualifications:
•Technical writing
•Technical illustrating
•Analytical thinking
•Great verbal and written communication skills
•Strong command of English language.
•Familiarity with simplified Technical English
•Ability to read and understand 2D traditional drawings.
•Ability to understand 3D solid models and data sets.
•Experience with maintenance manuals, repair manuals , structural repair manuals
•Experience with aircraft or automotive technical manuals
•Attention to detail
•Quality oriented mindset
•Self Starter
•Self Motivated
•Keen willingness to learn by digging for answers but also by asking questions.

Education:
•4 year College degree preferred: English majors, Business degrees, science degree.
•2 year engineering associate degrees equally preferred.

Software Tools Preferred Experience:
•Isodraw
•Arbortext
•CORENA
•MS Word
•MS Excel
•Framemaker
•3DVIA
•CATIA (general familiarity)
•ENOVIA (general familiarity)
 
Job Number: 53024
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Telemetry and Data Operator

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry. This is an opportunity to work on a cutting edge flight test program!

We are seeking Telemetry and Data Operators to join the team in Moses Lake, WA.

Knowledge and Responsibilities:

Operate and maintain telemetry, data processing, and video systems in support of flight test data collection
Assist in the preparation and check-out of telemetry systems, conduct telemetry operations, and process data post flight.
Flight test experience is strongly desired
Candidate will have knowledge of the operation of tracking antennas and telemetry receivers as well as all standard lab equipment used for the maintenance and troubleshooting of telemetry systems and subsystems
Candidate must be proficient in the use of data servers and computer peripherals for the purpose of data downloading, processing, managing, backup, and recovery of data
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: Now
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Hands-on)

Description:
Test Engineer (Hands-on)

Location: Burbank, CA
Pay Rate: $28/hr - $33/hr
Duration: Temp to Hire
Shift: not specified

SUMMARY: Develops test procedures and coordinate efforts with other engineering departments to support flight development and qualification programs. Performs mechanical testing of individual components and assemblies to ensure conformance with established specifications.

ESSENTIAL FUNCTIONS: The duties are not limited to the following description:

1. Creates and coordinates overall test plans and assists in developing test procedures and reports which meet the customer’s program testing requirements.
2. Designs test fixtures and reconfigures test equipment in order to meet program goals.
3. Reads and interprets technical procedures and drawings to determine test objectives, set-up requirements, testing limits, and acceptance criteria.
4. Installs test fixtures and specimens to the test equipment.
5. Operates static and dynamic servo-hydraulic test machines and electro-dynamic shaker systems.
6. Completes paperwork associated with the test procedure, including filing test results either electronically or in a conventional filing system.
7. Reviews and analyzes test data to determine if it meets program requirements.
8. Recommends revisions to test method or work flow to optimize the process while maintaining test integrity in accordance with internal and external customer requirements.
9. Performs new technology research on state-of –the-art test systems and software to determine whether new equipment will provide the Company with a cost or technological advantage.
10. Provides test support and analyzes test fixtures, machines, and data to solve problems on test programs.
11. Performs routine cleaning and servo-hydraulic material test machines and electro-dynamic vibration shakers equipment maintenance. Troubleshoots and resolves issues with test equipment.
12. Prepares, generates and maintains Statistical Process Control (SPC) charts and data in order to monitor the production and testing processes.
13. All other duties as assigned.
14. Responsible for promoting and abiding by the HSE rules and policies.

PRIMARY TOOLS OR EQUIPMENT: Able to set-up and operate servo-hydraulic material test machines and electro-dynamic vibration shakers with both manual and computer controllers. Able to set-up and operate temperature and vacuum environmental chambers. Able to set-up and operate digital and analog meters and displays, spectrum analyzers, plotters, recorders, dial indicators, calculators, various manual and pneumatic hand tools and other equipment and tools typically found in the test lab. Able to use measurement tools such as calipers, dial indicators, micrometers, weigh scales, and machinist scales. Ability to use shop hand tools, pneumatic tools, lifting devices, and cranes.
Use of typical office equipment such as telephones, computers (Microsoft Excel and Word), copiers, printers, fax machines, e-mail, scanners, etc.

KNOWLEDGE AND SKILLS REQUIRED:

Education and/or Experience: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or Applied Mechanics. Two years test-related experience in the field of Aerospace or Applied Mechanics, one year basic electronics and one year in machine design, or equivalent experience.

Language Skills: Able to read and comprehend instructions, correspondence, and memos. Able to effectively communicate verbally and in writing information to customers, clients, and employees.

Problem Solving: Able to apply logic, segregating the facts, make a decision, and carry out task.

Computer Skills: Working knowledge of Windows and word processing, spreadsheets and databases. Proficient in MS Office (Word, PowerPoint, Excel, Outlook).

Other Teamwork or Skills: Ability to participate as a team member. Knowledge of industry best practice in Configuration Management practices. Have an understanding of software and machine maintenance. Exercise excellent organization, communication and interpersonal skills.

ABILITIES REQUIRED:

Physical Requirements: While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle or feel objects and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch and lift light to moderate weighing items. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance.
 
Job Number: 8475
Job Location: Burbank, CA
Rate: 28-33
Per Diem: Split Possible
Overtime: Possible
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer – Level 4

Description:
Location: Denver, CO
Rate: DOE
Duration: 1 year contract (starting in January)
Overtime: Exempt

**MUST be a U.S. Citizen**

Job Description:
- Performs thermal analysis at both the detailed component level and at the systems level.
- Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed.
- Develops specialized analytical tools as required to perform these functions.
- Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient.
- Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements:
- Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
- 10 years demonstrated ability to perform system-level thermal analyses.
- Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
- Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications:
- Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
- Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
- Demonstrated proficiency applying analysis results to hardware solutions is desirable
- Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
- Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
- Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 7983
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer III & IV - Everett, WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

CATIA V5

Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

CATIA V5
 
Job Number: ToolDesWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / CREO / turbomachinery, rotating machinery experience required CA

Description:
160525/7351950
Job Title: Turbomachinery Mechanical Design Engineer

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7351950
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer III CA

Description:
Job Title: Turbomachinery Mechanical Design Engineer III

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates should have at least 3 years of experience **

Ideal candidates will have 3 to 10 years of experience.



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7517058
Job Location: Canoga Park, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WB-WPB Flight Test-Grade 10

Description:
PURPOSE
Flight test planning, instrumentation checkout, flight test conduct (including real-time monitoring), post test data analysis, and reporting on helicopter flight tests in structures and dynamics.

COMPETENCIES
1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
3. Large volumes of gathered flight data are processed and analyzed.
4. Certification and/or qualification tests are summarized in reports.

EDUCATION AND EXPERIENCE
- Bachelor's in Aerospace or Mechanical Engineering as a minimum
- Candidate must have flight test or aerospace design experience
- Rotary wing experience preferred.
 
Job Number: 17-702-1581
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Back to Advanced Job Search