Job Search Results

197 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/21 Wednesday 10:00AM Pacific Time by ContractJobHunter. )

Listings 1 - 197

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 04/09/2019
Last Updated: 04/10/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Designer Catia (336)

Description:
*This is a full-time, 1 year contract position located in Fort Worth, TX*

We are seeking a skilled tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, [CATIA].

Required:
*9 years experience in aerospace tool design using CATIA.

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.
*Active Secret Clearance (and reinvestigated within last five years)

*Perdiem Split available for out of town candidates



Preferred:

*GD&T

*AS or 4 year degree
 
Job Number: 336
Job Location: Fort Worth, TX
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Engineer - CATIA V5 - Los Angeles

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.

Our client in the Los Angeles area is looking for a CATIA V5 structural design engineer to work on a freighter conversion. Airbus experience and modifications to aircraft structure relative to cargo doors area and cargo handling systems is also desired.

Please describe your experience in detal with CATIA v5, emphasizing when it was last used for design, modeling, and drawing, and how it applies to Primary Structures.
 
Job Number: Keltia111417
Job Location: Los Angeles, CA
Rate: 50-55/hr
Per Diem: possible
Overtime: No
Duration: 6mo +
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic 2nd Shift - Aerospace - Everett WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Summary Description:
Assembles fabricated/machined metal parts and standards into partial or completed assemblies.

Job Duties and Responsibilities:
•Reads and interprets written work orders and aerospace blueprints and drawings to determine parts requirements and sequence of assembly step.
•Cleans or otherwise prepares part surfaces for assembly.
•Applies and cleans excess adhesives, lubricants, sealants, and other substances as required by work order, drawing, and/or blueprint instructions to piece parts for assembly.
•Inserts rings, pins, and other standards and fastens parts together using nuts, bolts, screws, clips, rivets, or other fasteners.
•Uses hammers, punches, pliers, screwdrivers, wrenches, rivet guns, and other hand tools to perform assembly operation.
•Installs bushings and bearings and uses hand tools to produce close fit between parts.
•Operates drill presses, presses, or riveting machines to assist in assembly operation.
•Uses micrometers, force gauges, calipers, torque wrenches, dial indicators, and other types of precision measuring tools and equipment. Reads measuring tools and interprets readings in performing assembly operations.
•Handles parts, subassemblies and assemblies with care to ensure those with finishes or special coatings are not damaged or blemished.
•Performs functional testing.
•Meets established standards for productivity and quality. Confers with supervisor when problems occur which impact expected levels of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read, analyze, and interpret general business language, technical procedures, aerospace blueprints and drawings, manuals, governmental regulations, and safety procedures and instructions.
•Ability to add or subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
•Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to use hands to finger, handle, or feel; reach with hands and arms; and talk or listen.
•Must be able to sit or stand for at least 10 hours a day.
•The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and one year or more related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Rebecca
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 08/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians - Top Rate + Expenses

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada. We are based in Everett WA and have been in business for over 18 years.

Our client in the Moses Lake area of WA has a short term (1-2 months in length with the possibility to extend) contract assignment for highly experienced Avionic Technicians with wire installation, that preferably have an Airframe and Powerplant (A&P) licence certification.

The client will pay top rate with per diem and accommodations to get the right people there for the project.

Description:
* Perform assembly, installation and test tasks on wire harnesses, control boxes, and electromec assemblies per instructions.
* Perform verifications of flight hardware and documenting results in a clear, precise and complete manner
* Perform systems tests using Avionics test equipment
* Proven ability to troubleshoot basic problems
* Experience with EMC / EMI / RF testing etc
* Experience building wire harnesses including terminating and installing connectors.

Please e-mail Emily at emily@keltia-design.com with your updated resume, your desired pay rate, and the soonest available start date.
 
Job Number: KeltiaML2018
Job Location: Moses Lake, WA
Per Diem: Yes
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/13/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CABLING ENGINEER - DIRECT JOB

Description:
JSG is hiring a Cabling Engineer - Direct Hire for our client in Irvine, CA!

Knowledge, Skills and Abilities:

Specify, design, develop, fabricate, and commission custom cabling for electrical, electro-mechanical, and electronic systems encompassing high voltage and high current techniques and integration with control and data acquisition systems.
Provide detailed specifications and support the procurement of commercial off the shelf cabling products.

Produce and examine drawings, wiring diagrams, specifications and other documentation at all stages in the project from the concept through to full manufacturing, installation, and commissioning.

Support projects with confident knowledge of electrical cabling designed for EMC, safety and reliability.
Manage project documentation in accordance with requirements of the ISO 9001 quality management system.
Liaison with engineers and scientists at different levels deploying new electrical/electronic cabling systems.
Interface with engineers and physicists developing experimental and custom systems.

Required Education:

B.S. in Design/Electrical Engineering or equivalent job experience preferred.
Preferred Education: Knowledge of relevant IEEE or IEC standards is preferred
Software Knowledge and Skills:

Practical knowledge of SolidWorks 3D CAD system.
Hands on experience with CAD systems for creating cable schematics and cabling layout and mounting. Industrial electrical system simulation software is preferred.
Basic knowledge of CAD systems for mechanical design (AutoCAD, SolidWorks).
Practical literacy in MS Word, Excel, Outlook and PowerPoint.
 
Job Number: 371499
Job Location: IRVINE, CA
Per Diem: If Qualified
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 02/06/2019
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Aerospace - Ellensburg WA Area

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

CNC Machinist

Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Responsibilities
Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures and certify/test product.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching

Qualifications
Must be able to efficiently setup and run one or more of the following types of equipment independently and meet expected manufacturing standards:
CNC Mill
CNC Turn
Experience & Knowledge
Required knowledge of GD&T, and ability to read blueprints, parts drawings, and setup books.
Preferred Math skills such as algebra, geometry, and trigonometry.  Desire to work in team environment: work positively and collaboratively with others, contribute to the work cell, be open and receptive to ideas and feedback, and treat others with respect
Skills & Competencies:
High school diploma or equivalent with 1-2 years related experience.
Post high school coursework or professional certification preferred.
 
Job Location: Ellensburg, WA
Rate: DOE
Duration: Contract to Direct
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist 1st and 3rd Shift- Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team. This is a weekend/night shift of 3 twelve hour shifts with pay for 40 hours.
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker - Mechanical 2D & 3D

Description:
Required Check 2D engineering data and 3D models for conformance to company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.

Review all current positions posted at www.hi-tecsolutions.com/jobs
 
Job Number: 142810
Job Location: Savannah, GA
Rate: 53.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 04/04/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter II ( Rocket Center, WV ) 8913594

Description:
Design Drafter II ( Rocket Center, WV ) 8913594
6 Month Contract to direct hire potential

Pay Rate $30-40 /hr W2

Top 3 Skills:
Siemens NX experience,
2-5 years of ASME standard experience/knowledge,
mechanical industry experience, defense product experience preferred.

Job Duties:
This position will join the Design Modeling Group in Rocket Center. You will model fully defined components and assemblies using Siemens NX11, and will create/revise parametric drawings in conformance with ASME modeling and drawing standards. This position will also collaborate with various engineering disciplines to accomplish other related tasks, so the ability to work well in a team environment is a must.//

*Additional responsibilities include:
- Work with other drafters/designers, engineers, and manager on assigned projects.
- Create product/tooling designs and layouts from engineering notes, drawings, sketches and general instructions

*Basic Qualifications:
- HS diploma or equivalent is required.
- Associate’s Degree in formal educational program in Mechanical Drafting/Design/CAD or Technical design preferred.
- Must be able to obtain a DoD Secret clearance; U.S. Citizenship is a prerequisite.
- 2 years of related CAD experience is highly preferred.
- Microsoft Office experience.
- Strong mechanical skills and background.
- Comfortable working for extended periods at a work station.//
*Additional Qualifications:
- Previous experience with Siemens NX.
 
Job Number: 8913594
Job Location: Rocket Center, WV
Rate: 40
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 02/07/2019
Last Updated: 02/20/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/06/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 03/25/2019
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Our client is in need of an Electrical Engineer with integration and test experience. If you have the skill set listed below, do not hesitate to apply today!

The ideal candidate for this position will perform the following tasks:
* Responsible for providing electrical engineering support to integration and test of a CNS/ATM upgrade on a C-130H aircraft. This includes defining system requirements to verify hardware requirements, designing the Group A installation, supporting production and development test activities, and troubleshooting production and test failures.

Mandatory Qualifications and Experience:
* Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design is required.
* Must be experienced with CADDAM design software for electrical design is required.
* Ability to understand schematics, generate interconnect diagrams and troubleshoot hardware is required.
* Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
* Must be U.S. citizen
* Experience with aircraft architectures and electrical integration of avionics subsystems.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129605
Job Location: Greenville, SC
Duration: 1 year
Start Date: ASAP
Input Date: 01/23/2019
Last Updated: 01/30/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 08/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Design 2 CA

Description:
Engineer Circuit Design 2 (Job Number: 18009388)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 20, 2019

Target End Date: May 15, 2020

Pay Rate: $40 to $41/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year



Recent BS graduate to work on implementation of digital logic for space applications. Assignments vary based on individual interest and background in the fields of digital communications, signal processing, network routing and switching protocols, and computer architectures. Activities include VHDL design of ASIC and FPGA, verification via simulation and emulation, synthesis, and timing analysis. Thorough understanding of digital logic design. Study courses include digital communication, signal processing, network routing and switching protocols, or computer architectures. Experience with C/C++, VHDL, or Verilog. Experience with commercial CAD tools (simulation, synthesis, and place-and-route). Hand-on lab experience is highly desired. Must have good interpersonal skills and able to work well in a team environment. Must have good oral and written communication skills.


Basic Qualifications:

Bachelor’s Degree in Electrical Engineering from an accredited university plus 2 years of experience or a Master’s Degree in Electrical Engineering plus 1 years of experience.
 
Job Number: MB-1719
Job Location: Redondo Beach, CA
Rate: 41/hr max
Per Diem: no
Duration: 12 months
Input Date: 01/16/2019
Last Updated: 04/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical – 3 CREO CA

Description:
163976
Engineer Electromechanical – 3 (Job Number: 18012130)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Mar 27, 2020

Pay Rate: $50 to $52/hr

Work Schedule: 9/80

Duration of Assignment: Up to year



Job Description:

Product Engineering has an immediate need for a Mechanical Design Automation Library (MDAL) Designer to support the creation and verification of standard CAD parts and sub-assemblies utilizing our solid modeling tool (PTC Creo). Candidate must be detail-oriented with effective communication skills, at an expert level in the use of Creo, and competent in interpreting part specifications and Geometric Dimensioning & Tolerancing (GD&T) design principles.


Basic Qualifications:

•Bachelor of Science Degree plus 5 years of experience or Associates Degrees plus 9 years of experience in Information Technology, Engineering, or a related technical discipline.


•6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)


•Experience in change control procedures and processes


•Experience with Microsoft Office software


•Solid interpersonal and communication skills


•Good organizational and problem solving skills with an ability to adapt quickly to changing requirements



Preferred Qualifications:

•Knowledge and some design experience of electronic parts and assemblies


•Knowledge of government project and business rhythms
 
Job Number: MB-1716
Job Location: Redondo Beach, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/19/2019
Last Updated: 02/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Rep N3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Engineering Design Rep N3
(U.S. Citizenship or Green Card Required*)
Centennial, CO
2019-7828

Responsibilities:
• Provide engineering design packaging and drawing expertise within the Ground Command Control and Communications (GC3) Organization.
• Develop and complete drawings to be released in the configuration managing system.
• Drawing include design models, parts lists, documents and schematics.
• Develop drawings using model-based views, parametric dimensions and feature definition using best practices including geometric tolerancing and dimensioning.
• Use available automations and utilities to perform self-verifications of models, drawings and build of materials.
• Work within the applicable engineering release system to create or complete the change documents as needed.
• Create supporting administrative documentation and products associated with a given design, including the engineering (EBOM), Change summary documentation, accurate change cut in, Schedule/Milestone priorities, as applicable.

Qualification:
• Proficient in CAD Aided design and NX implementing electrical systems
• Proficient in Geometric and Tolerancing applications
• Proficient with MS Office (Word, Excel, PowerPoint, Outlook, etc.).
• Advanced understanding of electrical / electronic circuits.
• Involvement in and completion of technical class projects or on-the-job engineering tasks.
• Demonstrable communication skills (verbal and written; including presentations).
• Complete online profile and apply online to this requisition.
Preferred:
• Demonstrated experience in AutoCAD and NX implementing electrical systems, packaging and designs
• Able to perform CAD file sharing and conversion and file management.
• Understanding of electro mechanical interfaces
• Effective communication skills
• Able to manage multiple tasks; attention to detail; accuracy; self-motivated; initiative; teamwork
• Able to identify, process and resolve design issues
• Work with minimal supervision.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science degree in Engineering and or Engineering Technology (Electrical or Computer)
• 5-8 years of applicable experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7828
Job Location: Centennial, CO
Rate: Based on experience
Duration: 6 Months
Input Date: 01/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - Secret Clearance

Description:
Job Description:

• Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis and Device Implementation & Constraints, System Integration and Test.

• Design Low/Med Complexity Circuit Card Assemblies (CCA) and Low/Med Complexity Field Programmable Gate Array (FPGA) starting from System De-composition and completing through System Integration and Test

• Perform CCA Design specifying Mixed Signal Technology circuits consisting of A/D, D/A, Processors, I/O communication and Programmable Logic (FPGA, CPLD) circuits.



Required Experience:

• BSEE, Computer Engineering. or other related technical field of study

• 4+ years of relevant experience as it pertains to digital design process within FPGA

• Knowledge of High Complexity Digital Design Techniques and Devices

• Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools.



Desired Skills:

• MSEE

• General: Microsoft Office, DOORs (Requirement Specification and Tractability), Revision Control • Circuit Card: Cadence Allegro for Schematic Entry and to support PWB Layout/Route

• FPGA: Mentor Graphics HDL Designer, Mentor Graphics ModelSim/Questa, Synopsis Synplicity, Xilinx Client, Xilinx Vivado, Altera Quartus.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-49882
Job Location: Clifton, NJ
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-21 00:00:00.0
Start Date: 2018-12-17 00:00:00.0
Input Date: 11/28/2018
Last Updated: 03/25/2019
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/07/2019
Last Updated: 02/20/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist - Lathes - 2nd Shift - Aerospace - Everett, WA

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist - Lathes - 2nd shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical college or equivalent experience in industry.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist Millturn - 2nd Shift - Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist Millturn - 2nd Shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Maintenance Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-7899

Responsibilities:
• Perform supportability analysis and maintenance task analysis.
• Review drawings, Change Requests (CR), Engineering Change Proposals (ECP), computer models and other technical documentation to identify maintenance and supply support requirements for the design.
• Support the development, maintenance and update of requirements database in accordance with GEIA-STD-0007, MIL-STD-1388-2B, and SLIC/SLICWAVE.
• Develop Maintenance Engineering source data to be used in the creation of Field Maintenance Technical Manuals, National Maintenance Work Requests (NMWR), and other publications.
• Assess emerging designs for requirements compliance and recommend design alternatives to enhance supportability and maintainability.
• Conduct detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to maintain and support the design.
• Document results of the detailed task analysis in the Logistic Support Analysis Record (LSAR) database.
• Translate engineering & other technical information into source data in support of ILS products development.
• 10% travel

Qualifications:
• Hands on experience in the maintenance of ground combat vehicles a plus.
• Familiar with MIL-STD-1388-2B and GEIA-STD-0007 a plus.
• Experience with LSA/LSAR and SLIC/SLICWARE a plus.
• Demonstrated knowledge of Special Tools and Test Equipment (STTE) a plus.
• Working knowledge of U.S. Army logistics support structure, policies, and procedures a plus.
• Excellent interpersonal and communications (oral and written) skills required.
• Motivation to work independently with minimal supervision.
• Personal computer skills, familiarity with CAD models (PRO-E/Product View), and proficiency with MS Office applications.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• 2+ years applicable experience with a Bachelor Degree in an Engineering discipline; other degree disciplines will be considered with relevant applicable experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7899
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 03/05/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer with Composites

Description:
• Plans, directs, and coordinates manufacturing processes on factory floor
• Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.
• Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency
• Confers with planning and design staff concerning product design and tooling to ensure efficient production methods.
• Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards.
• Estimates production times, staffing requirements, and related costs to provide information for management decisions.
• Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.
• Applies statistical methods to estimate future manufacturing requirements and potential.


Some Combination Of:

• Authoring work instructions
• Designing tools and fixtures
• Working with Design engineering to ensure manufacturability (DFMA)
• Composite part experience (hands on or design)
• Composite or metallic structures experience (hands on or design)
• Root Cause analysis and corrective action implementation
• Engineering Liaison to manufacturing
• Planning and sequencing the build of parts and assemblies
• Experience Designing with Catia
• An engineering degree or 5 years of related experience



Required:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline or equivalent of 7+ years of role related experience.
• Experience in aircraft composite fabrication and assembly processes
• Knowledge of lean manufacturing philosophies and tools
• Excellent verbal and written communication skills
• Excellent interpersonal and coaching skills
• Ability to interact with all levels of the organization
• Excellent Organizational Skills and problem-solving skills
• Strong team player
• Excellent computer skills, word, excel and PowerPoint
• CAD experience (Catia V5 mandatory and Solidworks preferred, but not required)
• Knowledge and experience with AS9100 a plus
• Experience with manufacturing based ERP systems a plus
• Must be able to work all shifts and available for overtime as well as weekends when needed.
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).

The Structures Company is an AA/EOE.
 
Job Number: 270
Job Location: CA
Rate: $50-$60/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 02/26/2019
Last Updated: 03/08/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
4. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
5. Investigate and assist in preparing justification for equipment and facility requests.
6. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
7. Participate in Design for manufacturing assessments with Engineering.
8. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
9. Perform audit of co-workers output based on defined requirements and procedures.
10. Must demonstrate knowledge of ME policies and procedures.
11. Incorporate Lean Manufacturing Methodology into existing and future processes.
12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
13. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
14. Support all Safety, Sustainability and Ergonomic Initiatives.
15. Aid in development and maintenance of Business Continuity Plan.
16. Author DRDI/DMT rework instructions to support effective corrective actions.
17. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
18. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10424
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.


Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-287
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
7801 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-7801
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/25/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree Required GA

Description:
7847 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
MUST have a Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.

1. Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. Society of Mechanical Engineering certification desired.
3. Knowledge of manufacturing and production engineering principles, concepts and general business operations.
4. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants.
5. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT).
6. Ability to use standard business applications software and/or specialized data analysis tools.
7. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems.
8. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact.
9. Ability to work within general work objectives regarding projects and team goals.
10. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-7847
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/06/2019
Last Updated: 02/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer-Brazing

Description:
This Temp-to-Direct Manufacturing Engineer’s primary function is to help drive continuous improvement throughout the organization. This includes identifying and removing waste from the current products and processes, implementing lean manufacturing concepts into the production and support processes, recommending improvements in safety and environmental compliance, engaging the operations team members through specific training, and focused project management. The Manufacturing Engineer also supports the engineering and manufacturing teams with CAD design, machine programming, tool and die design and qualification, and management of the change control processes.

QUALIFICATIONS:
Bachelor of Science degree; Manufacturing/Industrial/Mechanical Engineering or related technical field.
Experience in a fabricated metal product-manufacturing environment required.Hands-on experience preferred.
Must be experienced with lean manufacturing and other current manufacturing concepts, practices and procedures.This includes Kaizen, 6-sigma, shop floor interface, product testing experience, quality tools, standard work, visual controls, mistake proofing, etc.
Ability to develop and maintain PFMEA documentation
Knowledge of vacuum brazing desired; both low and high temperature.
 
Job Number: 23194
Job Location: Buffalo, NY
Duration: Temp to Direct
Start Date: ASAP
Input Date: 01/31/2019
Firm Name: JOHN GALT STAFFING
Attention: Al Dubosky
Address: 77 S BEDFORD ST
City, State: BURLINGTON, MA 01803
Phone: 781/273-9995
800 Phone: 888/946-4754
Fax Phone: 781/273-9099
Website: www.j-galt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler - Aerospace - Everett, WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
We have been in business since 2000

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Material Handler - 1st Shift
Summary Description: Prepares parts, assemblies, and other items for shipment, and receives, verifies, and records incoming materials.

Job Duties and Responsibilities:
•Wraps and packages completed parts and assemblies and boxes for shipment to customer.
•Performs part-marking per written work order instructions.
•Verifies quantities to be part-marked, packaged, and shipped and examines outgoing shipments to ensure shipments meet specifications.
•By using the company’s MRP system to verify deliveries, put parts on hand and create packing slips.
•Prepares and secures cartons, crates, pallets, and other containers for shipment of goods.
•Stamps, stencils, labels, or affixes identifying information and shipping instructions onto cartons, pallets, crates, or containers as required.
•Determines method of shipment and posts weights and shipping charges, and affixes postage as necessary.
•Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records.
•Unpacks and examines incoming shipments, rejects damaged items, records shortages, and communicates with the buyer and/or shipper to reconcile damages and shortages. Routes items to the appropriate departments as required.
•Monitors and maintains appropriate inventory levels of shipping materials and supplies.
•Uses handtrucks, pallet jacks, forklifts, and material handling equipment to move shipments from shipping and receiving area to storage or work areas.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise which impact expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, and procedure manuals.
•Ability to add, subtract, multiply, and divide using whole numbers, common fractions, and decimals.
•Ability to carry out detailed but uninvolved written or oral instructions.
•The employee is frequently required to use hands to finger, handle, or feel, reach with hands and arms, and talk or listen.
•The employee is regularly required to sit, stand, walk, stoop, or crouch.
•The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and six months or more related experience and/or training; or equivalent combination of education and experience.
 
Job Number: Keltia1016-1
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer who would like to learn and contribute to the Design Process. This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.

The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is both an individual contributor and mentorship level position.

The candidate will:
• Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work. Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
• Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
• Implement and support Standard Work processes across all programs to deliver consistent results.
• Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
• Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
• The candidate must be a US person:

Education / Certifications
• BSME or AE minimum, MSME preferred

Experience/Qualifications
• Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
• Prior experience in Aerospace Structures and Engineering Fluid Component Design.
• Knowledge of drawings, geometric tolerancing, and drawing interpretation.
• Experience with Manufacturing techniques for limited production hardware.
• Ability to work within a matrix organization to achieve team and program goals.
• Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
• A positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
• Seven (7) to fourteen (14) years’ experience desired.

Industry Experience:
• Previous experience in Aerospace Component Design desired

Optional:
• Pro-E/CREO/Simulate preferred.
 
Job Number: 1910096941
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Design Engineer - Creo - Secret clearance

Description:
-Creo design experience
-develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
-extensive experience with Creo CAD system.
-must have an active Secret walking on.
 
Job Number: 21547
Job Location: AZ
Rate: open
Per Diem: yes
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 10/03/2018
Last Updated: 08/21/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer with Tooling & Mechanical /FEA test on structures

Description:
Tooling experience and mechanical design (Any CAD) and stress/FEA (mechanical test / FEA test on the structures) skills for Clearfield, UTAH for 12 month plus CONTRACT (Possible Contract to hire/ Temp to PERM). US Citizenship required
 
Job Number: PL-Clearfield
Job Location: Clearfield, UT
Rate: open
Per Diem: Possible
Overtime: Possible
Duration: 12+ mos.
Start Date: 2 weeks
Input Date: 01/15/2019
Last Updated: 04/03/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043

Description:
Mechanical Technician ( Dulles, VA ) TS8946614 and 9293043
8 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

Active Clearance preferred, Secret or TS

Seeking TS/SCI candidates with 3-5 yrs+ exp in payload/spacecraft integration.

- Hands-on detailed work required, including extremely fragile space product installations, modifications, and general handling.
- Ability to demonstrate detailed technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams.
- 100% adherence to established ISO processes, diligence to detail, and efficient execution with quality results for cost effectiveness *absolutely required*.
- Ability to learn quickly. Bonding, taping, torquing, etc. with delicate honeycomb composite/aluminum panels and aluminum brackets a minimum. Must have 'a touch' for delicate equipment. Must have virtually zero defects in workmanship.
- Ability to proactively identify issues, escalate to appropriate channels, and *offer* solutions to engineering for review. -
- Ability to work with diverse team, take constructive feedback from QA support personnel.
- Experience with working inside Clean Rooms, Hazardous Material Handling, Hazardous Operations protocols, and related operational protocols required.
- Knowledge of Excel, Word, Powerpoint, general computer handling, and Tool Control required. ESD, FOD, and 5S management techniques required. 3D CAD, TipQA, Windchill, and CREOView preferred.
- Knowledge of advanced machine shop principles helpful. Little to no machine shop work is done by I&T Techs, but interfacing with Machine Dept. required on occasion.
 
Job Number: TS8946614 and 9293043
Job Location: Dulles, VA
Rate: OPEN
Per Diem: NO
Overtime: yes
Duration: 8 months
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 07/13/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metallurgist - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


Our client is a national leader in aerospace R&D and manufacturing technology and is looking for an experienced Metallurgist to join their R&D Department to complement their ongoing R&D projects in Actuation Systems and other Aerospace Applications

This can be a contract position with the option of going direct if desired and an attractive compensation package is available.
10 Years experience with Aerospace applications desired.
This position will involve responsibility to support the design, R&D and manufacturing departments.
Requirements

Bachelor’s degree in Engineering and/or Materials Science preferred with. 10+ years’ experience in an aerospace environment
Good documentation skills and practices Proficient in Microsoft Office (Excel, PowerPoint, Outlook, MS Project)
Disciplined and high attention to detail Ability to communicate effectively with internal and external customers
Ability to work well in a diverse team environment and with minimal supervision
If you wish to be submitted please send an updated resume in Word format with your salary requirements and availability.
 
Job Number: KeltiaMAS1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/25/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Technical Designers/ Technical Analysis- Structural at Berkeley, MO

Description:
Technical Design (Level 1 and 2)- Position 1

Location: Berkeley, MO
Duration: 6+ Months

Skill Code: 636- Structural Design

Description:
Uses manual or Computer Aided Design (CAD) tools to define or revise mechanical/structural engineering product definitions. Verifies accuracy of non-technical data. Gathers relevant data for root cause analysis. Produces changes to resolve discrepancies in design packages. Works under close supervision.

Education / Experience:
AA degree in related discipline.

------------------------------------------------------------------

Technical Analysis (Level 1, 2 and 3)- Position 2

Location: Berkeley, MO
Duration: 6+ months

Skill Code: 65X-Structural Analysis


Description:
Assists in gathering and inputting data for structural analysis, fleet structural support analysis and structural testing. Inputs and retrieves data from existing databases. Updates and maintains document libraries. Works under close supervision.

Education / Experience:
AA degree in related discipline.
 
Job Location: Berkeley, MO
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 12/10/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB Designer 4 / Mentor Expedition CA

Description:
Designer 4 (Job Number: 18028630)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 4, 2019

Target End Date: Feb 28, 2020

Pay Rate: $42 to $45/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

PWB Designers specialize in the areas of printed wiring board layout, routing, and design. The ability to develop a solid board development plan (from pre-IDR1 thru IDR3) and to coordinate and conduct effective board readiness / artwork reviews is a critical skill to develop. CAD tool proficiency is absolutely essential. The ability to mentor others in the use of the CAD tools is required. Experienced performers are expected to take on final design and drawing check responsibilities. Familiarity with board producibility and assembly and manufacturing processes is required. Product Engineers and designers are expected to enforce and follow all applicable processes.


Basic Qualifications: High School Diploma/GED plus 6 years of PWB Designer experience.
Nine years industry experience in board layout


Preferred Qualifications:

Proficiency in Mentor Expedition flow related tools. Experience in high speed digital as well as RF board layout
 
Job Number: MB-1722
Job Location: Redondo Beach, CA
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 01/21/2019
Last Updated: 04/22/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Engineering

Description:
Must Be Eligible for a Clearance

Develops and reviews packaging design concept for complex nonstandard military and/or industrial equipment using CAD or specialty software; develops and checks packaging engineering drawings; schedules and monitors the build of the pilot and prototype; and validates the design.

Proficient with CAD software Creo (Pro/E); SolidWorks; Inventor;
 
Job Number: 45939
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/28/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Publications Illustrator US Persons Only (297)

Description:
*This is a full time, 6-12 month position located in either York PA or Sterling Heights MI*



We are hiring for a Publications illustrator who will support, design graphs, charts, schematics, dimensional drawings for use in technical reports/publications based on engineering drawings.



Daily work may consist of illustrating electronic assemblies, from various sources such as engineering, line art from photographs, hand art, blank pages etc.



Required:
*5+ years’ experience creating illustrations using Adobe Acrobat and Creo (or similar 3D software).
*Skilled in working with the following file types: DXF, PRT, JPG, TIFF, DWG, PDF, GIF
*Experience modelling and visualizing from 2D drawings with 3D CAD software.
*Must reside in US and be able to move to work sites in PA or MI for duration of assignment.
*No candidates on work Visas please; must be a US Person.
*HS Diploma, AS degree is a plus



Pluses:
*Able to create schematics and validate illustrations
*Experience reprograming & revolutionizing/automating processes
*Experience with Creo Illustrate
*Familiar with Visual Basic Macro, AutoLISP, or PhotoShop
 
Job Number: 297
Job Location: Sterling Heights, MI
Input Date: 01/15/2019
Last Updated: 02/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - Aerospace - Anaheim CA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.
We have several clients in the Anaheim area and one of them is looking for an experienced Quality professional to perform some Quality Inspections of their aerospace products.
Summary Description:
1) Inspection to be performed at Placentia Facility
2) Service type – Final Inspection prior to shipment
a. Types of inspection – Envelope dimensions (standard inspection equipment is used and available on site), manual/ general function (opening and closing with no specialized test equipment), and workmanship (cosmetics for paint, plating, sealant application).
b. Customer approved inspection plans with acceptance criteria for each product is to be used.
c. Customer has stated that they may send one of their “experts” provide initial training.
3) Product Types – designed aerospace products provided to Airbus Defense and Space (ADS)
a. Includes four mechanical latch assemblies and one machined bolt.
4) Service period – December 2018 thru March 2019
a. Anticipate one to two inspection activities per week
b. Anticipate 2 hours of inspection time per visit
 
Job Number: Keltia QI
Job Location: Anaheim, CA
Rate: DOE
Per Diem: NA
Overtime: NA
Duration: LT
Start Date: ASAP
Input Date: 12/11/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Vinicius
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Microwave Design Engineer 3 CA

Description:
RF Microwave Design Engineer 3 (Job Number: 18025908)

Number of Openings: 1

Location(s): United States-California-Azusa

Shift: 1st Shift

Target Start Date: Feb 25, 2019

Target End Date: Aug 31, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 8-31-19

Northrop Grumman Aerospace Systems sector is seeking a RF Microwave Engineer 3 to join our team of qualified, diverse individuals. This position will be located in Azusa, CA.

The successful applicant will be assigned to support RF design, analysis, and test of passive RF Microwave weather sensors/systems, subsystems, and components. Specific assignments may include testing of RF subsystem and RF components, performing CAD simulations, supporting anomaly investigations, deriving RF requirements, performing system analysis, managing RF suppliers, and supporting receiver integration and test. Additional responsibilities may be assigned commensurate with performance or due to business needs.

Note that this role will work 1st shift with a flexible start time between the hours of 6:30 am and 9 am. Some off-shift work will be required as needed by the program.


Basic Qualifications:

BSEE + 5 years of RF or RF test experience or 13 years of experience may be considered in lieu of degree.


Preferred Qualifications:

BSEE + 10 years of RF and RF test experience
 
Job Number: MB-1709
Job Location: Azusa, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 12/19/2018
Last Updated: 03/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 01/10/2019
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Seeking Sr. Creo Designers (Mechanical) for Sterling Heights, MI

Description:
Seeking Sr. Creo Designers (Mechanical) for Sterling Heights, MI / MUST BE A US CITIZEN
12 month CONTRACT
Minimum 9 years of design/drafting experience using Pro-E/Creo 4 CAD system. Any Creo Experience doesn’t need to be vs.4
Position Description
Sr. CREO Designer to support program initiatives. Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.
Skills Required
Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to company standards and procedures as well as military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to take and follow directives and work independently.
Skills Preferred
A strong knowledge of production methods and understanding of human factors.
Experience Required
Minimum 9 years of design/drafting experience using Pro-E/Creo 4 CAD system. Any Creo Experience doesn’t need to be vs.4
Experience Preferred
Experience with relevant applications in a defense environment.
Education Required
Associate Degree with emphasis in engineering drafting/design or an equivalent combination of training and experience; plus a minimum of nine additional years drafting and design experience, including five years of advanced design concepts and applications.
• How many years of Pro-E/Creo CAD system experience do you have?

=========================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
I need the last 4 of your social security # as well as your hourly pay rate in order to get you submitted!
Referrals appreciated
 
Job Number: PL CREO MI
Job Location: Sterling Heights, MI
Rate: $50.00 per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 01/08/2019
Last Updated: 04/03/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Engineer / Power supply design / FPGA NY

Description:
5828 Sr. Design Engineer
Number of openings: 4
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 70
Start Date: 02/04/2019
Tentative End Date: 02/03/2020

Job Description
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneurnatic components and systems that will become the new products. The incumbent plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Senior Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others.


A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the Division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Senior Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department or he/she might report directly to the Chief Engineer. The incumbent requires guidance on general assignment objectives and critical issues, but he/she is expected to make independent and unreviewed decisions on most technical matters. His/Her work is periodically reviewed for application of sound professional judgment as it applies to meeting overall program and company objectives.

The Senior Design Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent's operating as a part of a design team will be responsible for the physical hardware design. He/She must oversee the efforts of drafting personnel and Assembly & Test Technicians. In this role he/she must be an inspirational leader, a creative problem solver, and must be sensitive to feedback from team members to identify and resolve problems before the design is released to production.

In the early stages of a new program, the Senior Design Engineer will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations.

During the design and development phase the Senior Design Engineer will initiate and carry out any analyses necessary to ensure the integrity and conformance of the design. These will include stress analysis, fracture mechanics, thermal analysis, and producibility analyses. The incumbent is responsible for selecting the materials, fits, heat treatment and finishes used in the design. He/She must be familiar with the properties and characteristics of materials and processes used hardware, and with all standards and requirements pertinent to the Division's industry, such as Military, FAA, and NASA specifications.

The Senior Design Engineer is responsible for actively communicating with the involved Division personnel who will be manufacturing hardware. He/She must frequently communicate with Reliability, Environmental Test, and Test Equipment Designers to keep them current on design status and ensure compatibility with their activities. Frequent consultation during both the proposal and design phases with the Manufacturing and Product Engineering personnel is crucial. Often these groups must be motivated and persuaded to consider novel or unorthodox methods of manufacture and test in order to preserve the simplicity or integrity of the design. The incumbent also must be sensitive to the expertise of manufacturing personnel, responding to their suggestions when appropriate. A delicate balance must be struck to achieve high producibility and cost effective parts and assemblies that satisfy quality and performance goals. The Senior Design Engineer is expected to provide the leadership and cooperation to ensure this happens.

The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

This individual will represent a high level of design problem solving in the Company. He/She must often act as a technical consultant for other programs both in development and in production. The incumbent must be able to communicate fluently to audiences representing a wide variety of skills, background, and disciplines. Travel, sometimes frequent, will be required to communicate with customer engineering groups. The Senior Mechanical Design Engineer's primary responsibility is the mechanical design of often complex servornechanisms, while that of the Senior Electrical Design Engineer is the design of complex electronic control hardware. In both cases this includes working with the customer to understand and define the design constraints, helping to write a winning proposal, conceiving novel mechanical or electrical solutions, performing design analysis, developing hardware, providing accurate and proper documentation of the design, and designing for producibility. He/She must be prepared to sell the features of the design and its implementations to both the customer and the division personnel who will be manufacturing and supporting the design.

To achieve the position of Senior Design Engineer, an individual will have at least a BS degree in engineering with extensive experience in creating successful designs of electrohydraulic, electromechanical, mechanical and/or electropneurnatic servornechanisms and their control electronics. For a Senior Mechanical Design Engineer broad background in design analysis, including stress analysis, kinematics, strength of materials, fluid mechanics, and vibration is essential. Experience with closed loop systems, fluid power control, servornechanisms, fracture mechanics and Computer Aided Design is desirable. A Senior Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components. Most important is a proven record of accomplishments including successfully developed and produced designs and a demonstrated ability to participate in a product design team.

ACCOUNTABILITIES:

1. Develop new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume.

4. Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.

8. Consult on new product and market development efforts.

9. Maintain currency with materials technology, industry design requirements (Military, FAA, NASA, etc.), and modern design analysis tools.

10. When applicable supervise subordinate engineers and project/product engineering technicians.

Needs:
Space firmware experience
Power and mixed signal electrical design
Experience in high liability space – familiar with designing Rathard Application
Radiation hardware design
Experience with FPGA design hardware, Motor drives, signal conversion, lbdt rbdt
Understand 1553 RS-422
461 Mil standard understanding
BSEE with 10 years exp-
Cadence Allegro for design work
PC Board layout testing
Will need to test work, risk reduction
Familiar working with NASA / Commercial launch vehicle programs
Thrust vector control, election, launch and space vehicles
*astronauts program, satellite

Team player-will be on a large team
Power supply design DCD converters
 
Job Number: MB-5828
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/27/2019
Last Updated: 03/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior PCB Designer

Description:
Our client is looking for a Senior PCB Designer to work in Anaheim, California! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Design mixed signal PCBs (up to 16+ layers) from start to finish using Cadence Allegro suite of tools (16.5, 16.6, 17.2) – including stackup definition, component placement, routing, drawing creation (assembly, PWA, Bill of materials, etc).
* Perform activities related to Engineering Change Requests and Change Orders (ECR/ECOs) – incorporate redlines, investigate change requests, modify and update drawings and PCB designs, etc.
* Support OrCAD Capture CIS schematic capture for Electrical Engineers: provide guidance, requirements, consulting, generate schematic symbols and PCB footprints
* Perform detailed peer review of designs and of new submitted components (schematic symbol and PCB footprint) to the CIS CIP-E library.
* Support vendors and the disposition of inputs/deviation requests from PCB fabrication houses and assembly houses.

Mandatory Qualifications and Experience:
* High school graduate or equivalent (G.E.D.) plus specialized training.
* 8 years+ of experience directly related to PCB Design.
* Strong experience and knowledge of IPC requirements and best practices.
* Exemplary organizational skills and written/verbal communication is required.
* Experience utilizing Cadence OrCAD Capture CIS, Allegro tools for PCB Layout and AutoCAD for drawing creation/updates as driven by ECR/ECOs.
* Experience with PCB Design best practices in relation to signal/power integrity.
* Experience with designing multilayer, high speed PCB designs utilizing blind/buried vias and signal integrity techniques such as via picket fences/guard traces.

Desired Qualifications and Experience:
* Electrical Engineering background or degree preferred.
* Experience with PCB Designs containing signal isolation, high voltage, and current is a plus.
* Experience with Mil standards and specifications is a plus.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129625
Job Location: Anaheim, CA
Duration: 1 year
Start Date: 02/04/2019
Input Date: 01/23/2019
Last Updated: 01/30/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structural Designer 3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Senior Structural Designer 3
(U.S. Citizenship or Green Card Required*)
Cape Canaveral, FL
2019-7927

Responsibilities:
• Produce moderately-complex technical designs for civil / architectural / structural and some mechanical modifications to new and existing facility related systems in support of Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida.
• Provide CAD and project support for the construction of new and refurbishment of existing system elements as part of the Engineering and Infrastructure Team.
• Develop basic data and makes preliminary layouts, sketches, and notes necessary to present for design proposal then maturing to final design.
• Investigate pertinent design factors such as structural member allowable stresses, ease of fabrication, availability of materials and equipment, interchangeability and cost.
• Derive requirements, incorporating innovations and options to reach project objectives within schedule and budget.
• Provide engineering support for short- and long-term infrastructure planning and capital improvement construction projects and maintenance operations.
• Coordinate with other organizations affected by the design development.
• Check completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
• Identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in design layout to responsible engineers or designers.
• Generate Statement of Work implementation documentation used to direct subcontractors for fabrication and construction efforts.
• Work also in support of fabrication and construction phases, coordinating schedules and managing submittals and requests for information.

Qualification:
• Must have relevant designer role experience with expert level CAD skills.
• Extensive knowledge of civil, structural, architectural and mechanical drafting practices and sound knowledge of engineering design principles, practices, and industry standards.
• Wide and comprehensive acquaintance with and understanding of, both the technical phases of designing and fabricating industrial facilities, structures, personnel access support equipment and facility platform systems.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7927
Job Location: Cape Canaveral, FL
Rate: Based on experience
Duration: 12 Months
Input Date: 02/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Emma Ulrich
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Specialist (ProE/CREO) for Phoenix, AZ or Sterling Hts., MI

Description:
Seeking Sr. Design Specialist (ProE/CREO) for Phoenix, AZ OR Sterling Heights, MI - Req # 3463 (7+ mos CONTRACT)
REQ #3464 in STERLING HEIGHTS, MI PAY RATE is $51.44/hr per hour
REQ #3463 in PHOENIX, AZ PAY RATE is $46.77/hr per hour – Are you OK with this Phoenix hourly pay rate?
The contract does NOT include paid holidays or paid vacations

US Citizen requried

Minimum 9 years of design/drafting experience using Pro-E/Creo 4 CAD system.
Sr. Designer to support program initiatives. Creates innovative and practical mechanical and electromechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design. Positions to be located in Sterling Heights, MI (preferred) or Phoenix, AZ.
Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to BAE standards and procedures as well as military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to take and follow directives and work independently.

• How many years of Pro-E/Creo CAD system experience do you have?

=========================
If qualified, email a WORD version copy of your resume and then call to discuss at 774-210-4108.
I need the last 4 of your social security # as well as your hourly pay rate in order to get you submitted!
Referrals appreciated
 
Job Number: PLCreo AZ-MI
Job Location: Phoenix, AZ
Rate: 46.77
Per Diem: Possible
Overtime: YES
Duration: 7+ months
Start Date: 2 weeks
Input Date: 01/08/2019
Last Updated: 02/12/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 01/09/2019
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Piping Designer in El Segundo, CA(Refinery) 163999AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Piping Designer
Location: El Segundo, CA
Compensation: 55-65/hr DOE
Assignment Length: 12 Month Contract

Roles and Responsibilities

• Aptitude for learning computer file management systems and an understanding of computer workstations as they pertain to work procedures, networks and file servers.
• Good communication and people skills.
• A mathematical background.
• Strong problem solving and decision making skills.
• Moderate typing skills.
• Aptitude for accumulating the necessary data, including reference drawings, field notes, measurements, determining Operation’s needs, equipment manufactures’ data, etc. Prepares preliminary studies, layouts, working and detail drawings and diagrams.
• Determining the locations of pumps and exchangers, taking into account operating conditions and requirements, such as pressure drops, suction conditions, temperature ranges, etc
• Determines the manner of presentation (deliverables) after the final plan has been selected, including types of drawings required (isometric, etc.) selecting the number of drawings and diagrams required arrangements of details and views.
Ensure that completed design is functional, designed with safety and that all applicable codes have been followed and maintained

Qualifications and Education Requirements

• Ideal candidate will have a minimum of 10 years design experience associated to the petrochemical field.
• Good working knowledge of AutoCAD/CADWorx Intergraph software. Laser scanning capabilities a plus. Use of other computer-aided drafting software to produce/generate design and construction drawings.
• Computer literate in Microsoft Window NT system, MS Word, Excel, MS Access, etc.
 
Job Number: 163999AS
Job Location: El Segundo, Ca
Rate: 55-65/hr W2
Per Diem: N/A
Duration: 12 Months+
Start Date: ASAP
Input Date: 01/28/2019
Last Updated: 02/07/2019
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Manager - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


We have several direct and contract Sr. Program Manager positions in the Seattle area working on aircraft actuation system components in an R&D and Manufacturing environment.

This position will involve responsibility to oversee and effect the on time delivery of several simultaneous aircraft related subsystems programs with support from the design, R&D and manufacturing departments.

This position will also require the development of new business or expanding the product line with the customer. Will also involve establishing milestones and monitor adherence to master plans and schedules,

will identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.

Leads the work of employees assigned to the program/project from technical, manufacturing and administrative areas.



Overview

The Senior Program Manager is responsible for managing assigned customer programs from proposal through production. In conjunction with Business Development, the Program Manager serves as a direct contact to the customer for program business matters and issues.

Responsibilities

Interface with Customer Contracting Personnel, Customer PM, Government Contracting Officer (CO), Government Task Leader (GTL), the contract level Contracting Officer’s Representative (COR), government management personnel and customer agency representatives.

Responsible for formulating and enforcing work orders (resource schedule, project statements)

Developing and maintaining program master schedules and milestones

Reviewing work discrepancies

Identifying/quantifying scope change issues

Coordinating RFQ responses

Generation of monthly cost, schedule, technical status reports

Supervising program personnel and communicating program goals to Team Members

Responsible for the overall contract performance including the profit and loss of the program(s) through the life of the contract(s)

Must have recent experience in project development from inception to deployment as well as expertise in the management and control of funds and resources



Qualifications

Bachelor’s degree in Engineering required

At least 5 years of direct program management experience in an highly regulated manufacturing environment, aerospace a plus

PMP or PGMP Certification is preferred

Must have demonstrated capability in managing multi-task contracts and/or subcontracts of various types and complexity and generation of monthly cost/schedule progress reports

Must have demonstrated capability in managing multiple projects in parallel

Strong business acumen coupled with mental aptitude and motivation to learn new functions and expand areas of expertise

Experience required with FARs, contractual requirements and contractual negotiations

Manage all major issues in primary practice areas with minimal supervision

Proven ability to track and report programs against schedule, budget and phase review objectives

Develop and implement recovery and action plans for off-track programs or unplanned events impacting programs

Demonstrate initiative and advanced interpersonal skills in team problem solving situations, relationship building and aligning with business goals

Excellent leadership, organization, communication and negotiation skills

Position requires frequent interaction with various levels of and Customer management

Proficiency with MS-Project program scheduling and resource allocation planning tools is essential

Familiarity with Government regulations including ITAR and Export Control

Ability and willingness to travel approximately 10%
 
Job Number: KeltiaPM1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engineer 3 (UGNX Required) (AZ and MO)

Description:
Structural & Payload Design Engineer 3 & $

Location: Berkeley, MO and Mesa, AZ
Duration: 12+ months

Description:
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Education/Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification with Unigraphics CAD experience.

Skill Code: 647-Structural Design
 
Job Number: 17-08012
Job Location: Berkeley, MO
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 09/13/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Duration: 10+ Months
Start Date: FEBRUARY 2019
Input Date: 02/14/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer

Description:
Location: Cape Canaveral, FL
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description / Responsibilities:
- Produce moderately-complex technical designs for civil / architectural / structural and some mechanical modifications to new and existing facility related systems in support of company Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida.
- Provides CAD and project support for the construction of new and refurbishment of existing system elements as part of the company Engineering and Infrastructure Team.
- Requires extensive knowledge of civil, structural, architectural and mechanical drafting practices and sound knowledge of engineering design principles, practices, and industry standards.
- Candidate must have a wide and comprehensive acquaintance with and understanding of, both the technical phases of designing and fabricating industrial facilities, structures, personnel access support equipment and facility platform systems.
- Develops basic data and makes preliminary layouts, sketches, and notes necessary to present for design proposal then maturing to final design.
- Investigate pertinent design factors such as structural member allowable stresses, ease of fabrication, availability of materials and equipment, interchangeability and cost.
- Derive requirements, incorporating innovations and options to reach project objectives within schedule and budget.
- Provides engineering support for short and long term infrastructure planning and capital improvement construction projects and maintenance operations.
- Coordinates with other organizations affected by the design development.
- Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
- Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
- Responsible for the generating Statement of Work implementation documentation used to direct subcontractors for fabrication and construction efforts. Work also in support of fabrication and construction phases, coordinating schedules and managing submittals and requests for information.


Educational and Professional Qualifications:
- The successful candidate should have at least (10) years of relevant design experience in building and/or modifying heavy industrial facilities, support equipment and access structures.
- Also, he/she should have at least (10) years of Autodesk AutoCAD, (3) years minimum experience using 3D BIM AutoDesk Revit modeling.
- Shall have experience with CAD file conversion, hardware configuration, and drawing database management.
- Candidates may need to demonstrate design and CAD proficiency skills during interview process.
- Degree not required.
- Must have relevant designer role experience with expert level CAD skills.
 
Job Number: 10431
Job Location: Cape Canaveral, FL
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 03/06/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Technical Specialist I

Description:
PDS is seeking a Technical Specialist I for an open position in Savannah, GA.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services 

Principal Duties and Responsibilities:

Essential Functions



  • Contributes to planning, developing and coordinating of important engineering projects 
  • Provides specialized technical assistance to team members
  • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  • Determines and develops own approach to solutions within schedule and cost objectives
  • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 
  • Acts as liaison with representatives outside of the assigned group/area 


For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com
 

Additional Functions: 



  • Actively works to improve daily processes and ensures all work meets customer requirements 
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Unique Skills:



  • Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD data sets, in accordance to requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: 
  • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
  • Proper application and compliance with all Engineering and customer drawing requirements.
  • Use and understanding of GD & T a must.
  • Dimensioning and tolerancing including familiarity with ASME Y14.5. 
  • Application of best drafting and design practices and procedures.
  • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
  • Advise Design personnel regarding GAC drawing and design practices and procedures.
  • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. 
  • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
  • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
  • Essential Duties and Responsibilities
  • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
  • Ensures designs meet customer criteria, quality standards and FAA requirements.
  • Adheres to budget and project schedules.
  • Provides design guidance and feedback to other engineering personnel
  • Other duties as assigned.
  • Knowledge of industry design and documentation standards.
  • Experience with mechanical assemblies and manufacturing technique design.
  • Ability to work independently and cross-functionally.
  • Experience in communicating with employees/teams in productive and efficient manner.
  • Strong communication and problem-solving skills.



Other Requirements: 



  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


For Additional Information on this Opening Please Contact Angela Burke: 
Direct Number: 912-257-4939
Email Your Updated Resume to aburke@pdstech.com

 
 
Job Number: 1910097731
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/31/2019
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Burke
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9XaQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Tukwila, WA
Duration: 6 months with possible extension up to 1 year

Description:
Complete knowledge of design of experimental models, mechanisms, prototypes, test rigs and fixtures, test equipment, and load measurement devices. Includes mechanical, hydraulic and pneumatics systems design. Knowledge of machine shop tools and processes. Ability to integrate wide range of test instrumentation (e.g., strain, pressure, and temperature). Utilizes analytical tools (e.g., classical stress analysis, finite element analysis, CAD based kinematics) to validate design and document in report format.

Skilled mechanical and structural design engineer, proficient with CATIA and assembly design.
Familiar with client processes, design manuals and drawing release in a lab test environment (i.e non-production). Prefer lab test related background.
Familiar with client fastener design, selection, specification, supersession, process specifications and standards. Familiar with hardware and fastener installation as well as sheet metal design.
Complete understanding of CATIA workbenches- drawing, GSD, product structure and libraries.
Experienced with 3D modeling, 3D geometry, power copies, generating views, drawings, products and save management in CATIA.
Experienced with client REDARS
Knowledge of manufacturing and assembly processes in a lab environment.
General knowledge of shop processes and practices in a lab environment.
Able to work quickly and efficiently in a project environment under the direction of design engineers.
Able to communicate clearly and effectively with technical experts as well as support team in the execution of the project goals.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.

Skill Code:
657-Aerodynamic Testing
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/26/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Thermal/Fluids Analyst

Description:
PDS Tech, Inc. is seeking a Thermal/Fluids Analyst, in Minneapolis, MN.
Activities involve the thermal and fluid analyses supporting design and testing of precision guide munitions systems.
The position is within the Thermal and Fluid Sciences group of the Applied Mechanics department.
That group is responsible for thermal and fluids analyses in support of requirements assessments, trades studies, prototype design, detailed design, test preparation, and analysis of thermal/fluids-related test data to successfully guide design activities.
The and position work within an interdisciplinary design team to support the iterative and evolving design process.
• Model development - System and environment information collection - Material information collection - Development of a model - Model running for various scenarios - Collecting, summarizing, and analyzing results relative to task requirements - Documenting and presenting results with conclusions and recommendations
• Active participation in design team meetings
• Active participation in test planning activities
• Analysis, interpretation, and application of test data to design activities
• Working with group colleagues to develop and apply best practices to analysis activities

Skills/Experience/Education Required
• Proven skills in developing working fluids and thermal models from first principles
• Proven ability to develop working fluids and thermal models for complex geometries, boundary conditions, and initial conditions
• Proven ability to interpret, document, and report results of analyses to support design activities

• 5+ years of experience in fluids and thermal analyses
• Experience performing system engineering trade studies, analysis of alternatives, sensitivity analyses, etc.
• Experience working in an interdisciplinary engineering design team

• Bachelor's degree in Mechanical, Aerospace, or Chemical engineering OR Physics
Must have and active Secret clearance or held one within the last two years. Please list the candidate's clearance level in the submittal 

 Skills/Experience/Education Preferred
• Working familiarity with analysis tools such as ANSYS (Mechanical, CFX, Fluent) or STAR-CCM+
• Demonstrated ability to import geometries from CAD models (Creo) into analysis software
• Demonstrated ability to relate model results to allowable limits
• Familiarity with fluids and thermal test methods including test planning, instrumentation, data acquisition, and data analysis to validate models and conclusions
       
• Analysis of weapon systems
• Familiarity with weapon's specs
• Familiarity with multi-physics modeling
• Experience with aerodynamics
• Experience with HVAC systems
• Master's or PhD in Mechanical or Aerospace engineering with emphasis in fluid mechanics or heat transfer

 
 
Job Number: 1810093607
Job Location: Minneapolis, MN
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 08/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Ramon Quintana
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f84ZAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design / Aviation Aerospace experience required - Clearance CA

Description:
164027
1346-1 Tool Design
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 2/19/2019
End Date: 2/14/2020

Job Description:
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Utilizing Manufacturing Engineering skills to develop and solve complex issues. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems. May use CAD/CAM to design tools. Will accept level 2 and 3 experience.


Aviation Aerospace experience required.
Mechanical Engineering experience acceptable and
Manufacturing Engineering experience acceptable

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $56.91 Hourly
 
Job Number: JE-1346-1S5
Job Location: Palmdale, CA
Rate: 56.91/hr max
Per Diem: no
Duration: 12 months
Input Date: 05/08/2019
Last Updated: 05/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
- Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
- Complete understanding and wide application of technical principles, theories and concepts, in the field.
- Utilizing manufacturing engineering skills to develop and solve complex issues.
- Independently determines and develops approach to solutions.
- Provides technical solutions to a wide range of difficult problems.
- May use CAD/CAM to design tools.

Education/Experience:
- Bachelor's Degree required.
- 4+ years of Catia experience.
- 4+ years of CAD experience.
- 4+ years of tooling experience.
- Aviation Aerospace experience required.
 
Job Number: 10346
Job Location: Palmdale, CA
Rate: $75.00 - $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/29/2019
Last Updated: 06/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-309
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 01/02/2019
Last Updated: 03/05/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer ( Clearfield , Utah ) 8853608

Description:
Tooling Engineer ( Clearfield , Utah ) 8853608
12 Month Contract

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment, at the Clearfield, Utah location:

Responsibilities:
• Concept and design of special tooling within an Integrated Product Team structure
• Project management of vendor and CAD resources for design and fabrication of individual rocket motor and aircraft tools
• Use and/or manages Computer Aided Design (CAD) resources for tooling design
• Work with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proof tooling upon receipt
• Maintain tooling documentation related to design, fabrication and proofing
• Provide engineering disposition of damaged and discrepant tooling and oversee return to production
• Provides tooling estimates for new tools

Education and Experience Requirements:
• BS in Mechanical, Civil or Aerospace Engineering, or related field plus a minimum of internship experience.

Screening Criteria:
• Experience with design of mechanical and structural elements
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts preferred
• Experience with general metallic fabrication including welding, machining, and forming.
• Understanding of 3D CAD systems (CATIA V5, NX) preferred
 
Job Number: 8853608
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/07/2019
Last Updated: 02/07/2019
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 02/08/2019
Last Updated: 02/15/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wiring Harness Design Engineer

Description:
Must be able to obtain a security clearance if necessary.

designing harnesses for MIL ground vehicle environment highly desired

designing in Mentor Capital software highly desired

working with CAD draftsman to route harnesses in 3D CAD tools (Pro-E and/or NX)

working with CAD draftsman to develop released drawings for harnesses, electrical installations, wiring diagrams, etc.

working with systems engineers to define whole vehicle pin-level interconnect

working with physical architects to define harness routing channels, space claims
 
Job Number: 45963
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/02/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Back to Advanced Job Search