Job Search Results

13 listings were found that matched your search words: Keywords: ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2026/03/04 Wednesday 03:57PM Pacific Time by ContractJobHunter. )

Listings 1 - 13

Go To My Job Tracker

Expand all descriptions

Manufacturing Engineer--Onsite

Description:
Manufacturing Engineer – On-site. (72127) Experience with Solidworks preferred. Will be responsible for designing and creating 3D models. BS degree + 2 years of experience required. Pay range $50-57/hour based on experience.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240

Job Number: 72127
Job Location: Coventry, RI
Rate: 50-57
Input Date: 03/02/2026

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: 3495 KENT AVE
City, State: WEST LAFAYETTE, IN 47906
Phone: 765/412-3240
Email: lleszek@butler.com
Website: www.butler.com

Quality Operations Specialist – On-site.

Description:
Quality Operations Specialist – On-site. (72188). BS Degree + 7-10 years of experience required. Previous work at 14 CFR Part 145 Repair Station experience required. Strong understanding of FAA regulations required. Pay range $40-46/hour based on experience.

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240

Job Number: 72188
Job Location: Fort Worth, TX
Rate: 40-46
Input Date: 03/02/2026

Software Test Engineer – On-site.

Description:
Software Test Engineer – On-site. (72193) High priority! Active Secret Clearance required. BS degree + 5 years of experience required. Experience with Atlassian toolset preferred. Working knowledge of C required. Pay range $65-79/hour based on experience

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240

Job Number: 72193
Job Location: Middletown, RI
Rate: 65-79
Input Date: 03/02/2026

Inspection Technicians and Machine Operators – On-site

Description:
Inspection Technicians and Machine Operators – On-site. Entry level positions performing part inspection and machine operation. Pay range $18-$20/hour based on experience and shift. .

• US Citizenship or Permanent Resident Required
• Paid Holidays
• Dental
• BC/BS Medical Insurance
• Vision
• Direct Deposit

Send resumes to:
Laura Leszek
Email: lleszek@butler.com
Direct Dial: 765-412-3240

Job Location: Carroll, IA
Rate: 18-20
Input Date: 03/02/2026

Quality Operations Specialist

Description:
Quality Operations Specialist
Location: Fort Worth, TX
Job ID: #72188
Pay Range: $40-46 AN HOUR
12 MONTH CONTRACT
NO C2C
Citizenship Required

Job Summary:
The Quality Operations Specialist will ensure the compliance of the Bell quality management system to the regulatory requirements. They would be responsible for developing, revising and maintaining processes, procedures, and program plans in the QMS. In addition, will also be responsible for developing, revising and maintaining the processes and procedures for the Bell certified repair stations.

Job Responsibilities:
• Maintain, update, and revise as necessary QMS Procedures
• Revise Repair Station Training Manual
• Revise Repair Station Quality Manual for the addition of the Flight Research Center.
• Create a Procedure for one Common FAA Roster of Technicians for all Repair Stations
• Update Training Records for all Repair Station Employees
• Create /Revise Procedures for PC Extension
• Update /Revise all Repair Station Standard Training in Brain Shark
• Update/ Revise all ARD Training in Brain Shark
• Update/Track and Monitor Commercial Quality Escape RCCA
• Create Drug and Alcohol Random Testing Procedure for all Repair Stations
• Create /Revise Procedures for addition CPR/BPR Warehouse to Quality Management System
• Support cross functional teams engaged in continuous improvement initiatives and Root Cause Corrective Action (RCCA) efforts, along with risk evaluation and mitigation coordination
• Perform duties in accordance with company policies, procedures, processes, and guidelines

Education Requirements:
• BS College Degree

Skills/Experience Required:
• Experience 7-10 yrs. required.
• Experience developing and writing internal procedures and creating training classes
• Previous work at 14 CFR Part 145 Repair Station
• Action orientated and the ability to work either independently or as a member of a team
• Must have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint, Access, Project & Visio)
• Strong understanding of FAA regulatory requirements
• Skilled verbal & written communication interaction with both internal and external customers (government agencies, etc.).
• Corrective Action & Continuous Improvement Methodology to include Statistical Analysis & Project Management techniques
• Must work efficiently with minimal oversight, possess strong communication skills and be well organized.

US Person

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law

Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72188
Job Location: Fort Worth, TX
Rate: $40-$46 an hour
Per Diem: no
Overtime: POSSIBLE
Duration: 12 MONTH CONTRACT
Start Date: ASAP
Input Date: 03/02/2026

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Breanna Lashley
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: blashley@butler.com
Website: www.butler.com

Manufacturing Engineer

Description:
MUST BE 45-50 MINUTES FROM COVENTRY, ri (NO EXCEPTIONS)

Join us in shaping the future of advanced manufacturing and materials engineering. This role combines expertise in 3D printing and scanning technologies, CAD-based design, and materials and process optimization. You’ll collaborate across engineering, manufacturing, and supply chain teams to integrate cutting-edge technologies and ensure robust, efficient production processes.

What you’ll be doing as a Senior Advanced Manufacturing Engineer:
3D Equipment & CAD
• Operate and maintain 3D printers and scanning equipment.
• Design and create 3D models using CAD software for additive manufacturing and tooling. SolidWorks experience preferred.
• Conduct dimensional verification and quality control of components.
o Keep abreast of evolving 3D and additive manufacturing technologies, and allied technologies
o Keep abreast of evolving raw materials for 3D processes

Materials & Process Engineering
• Provide guidance on metallic and non-metallic materials and processes, including polymer matrix composites, alloys and structural bonding.
• Develop and evaluate new materials and process methods; create and execute test plans and reports.
• Collaborate with design and engineering teams to influence material selection and ensure compliance with specifications.

Process Optimization & Integration
• Develop and optimize manufacturing processes involving additive manufacturing and digital fabrication.
• Support capital equipment decisions and implementation of advanced technologies.
• Document and maintain records of manufacturing processes and improvements.

Cross-Functional Collaboration
• Support design and manufacturing engineering needs as SME to guide resolution of technical challenges and opportunities.
• Conduct on-site trainings with an aim of qualifying team members needing to operate these technologies.
Qualifications

Skills You Bring to This Role:
• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Materials Science Engineering, or related field.
• Minimum 2 years of technical experience in advanced manufacturing engineering focused on Additive Manufacturing.
• Hands-on experience with 3D printing, scanning equipment, and CAD software.
• Knowledge of metallic and non-metallic materials, polymer matrix composites, alloys, and structural bonding processes.
• AS9100 experience preferred.
• Familiarity with material qualification programs and statistical data analysis prefe

Job Number: 72127
Job Location: Coventry, RI
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 02/19/2026

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bill Carriveau
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: wcarriveau@butler.com
Website: www.butler.com

Systems Engineer-Active Secret Clearance Required

Description:
• Lead integration and test planning/execution, executing verification/validation events, and perform analysis to identify and resolve technical observations.
• Participate in system performance assessments and validation testing to ensure compliance with requirements and specifications.
• Execute integration plans and testing activities according to defined tasks milestones/schedules.
• Integrate and test system software builds for supporting integration, verification, and test activities.
• Collaborate with cross-program leads/stakeholders to generate test approaches, ensure test-setup readiness, and participate in key processes (peer, gate, and test readiness reviews).
• Confirm test and evaluation processes are conducted according to established procedures for software and hardware and ensure compliance with Department of Defense technology release and export licensing policies.
• Willingness to do local and non-local travel including experience with domestic and foreign military sales products. Expected travel is 10%.

Required Skill Sets:
• Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Experience with a program language i.e (MATLAB, Python, Perl, C/C++, Linux, and/or Unix).
• Experience with systems engineering, integration, networking, verification, validation and/or testing.

Desired Skill Sets:
• Experience using test equipment, software installations, and integrating or regression testing systems with certifications in CompTIA Network+ and or CompTIA Security+.
• Experience with MATLAB, Linux Operating Systems (Linux Red Hat), Unix, Perl, C/C++, and Shell scripting for performing integration, verification and test analysis, integrating and configuring electronics/network routers, and installing/debugging software.
• Experience with creating integration test procedures, test plans, test scripts, developing and maintaining configuration control documentation, and navigating through test setup schematics.
• Experience with agile and DevSecOps processes, implement (or maintain) agile methodologies, participating in daily team standup meetings, sprint reviews, program Increment (PI) Planning meetings, retrospectives, and agile tooling such as JIRA and Confluence, and support execution of the team’s backlog including performance analysis and issue investigation.
• Strong individual integration skills, knowledge of system algorithms, signal processing concepts, and determining system performance within a team environment.

Job Number: 72146
Job Location: Tewksbury, MA
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 02/19/2026

Engineering Test Tech

Description:
Engineering Test Tech
Location: Monroe, WA
Job ID: #72128
Pay Range: $42-48 an hour
6+ month contract

Job Description
JOB SUMMARY:

Engineering Test Technician will be responsible for supporting all aspects of assembly, validation, and qualification testing of both hydraulic and electromechanical actuation products.

JOB RESPONSIBILITIES:
• Fabrication, Assembly & use of test fixtures and test rigs
• Assemble and test hydraulic actuators and electro-mechanical actuators
• Acceptance testing of hydraulic and/or electromechanical products
• Ensure calibration and certification of all instrumentation utilized for test
• Coordinate maintenance activities related to the test area
• Support external testing activities at labs when necessary
• Perform basic machining operations using drill press, Bridgeport mill, manual deburr and polishing

EDUCATION/EXPERIENCE:
Associate degree preferred in:
• Mechanical Technology, Electrical Engineering Technology or related technical discipline, or equivalent job experience preferred.
• Must have a high school diploma, an equivalent certificate, or a bronze level WorkKeys certification and proficiency in the use of drawings, specifications, basic math, computer, technical and mechanical skills.

QUALIFICATIONS:
• Familiarity with AS9100 Quality System
• Blueprint reading and understanding of Geometric Dimensioning and Tolerances
• Demonstrated technical capabilities working in a team environment
• Ability to use precision measuring devices such as micrometers, dial indicators, oscilloscopes, power supplies, etc.
• Ability to handle fast paced environment
• Attention to detail and a high level of accuracy
• Minimum 1 year experience in assembly, test, & troubleshooting of electromechanical & hydraulic actuation products or related mechanical experience required. General hydraulic theory and knowledge preferred.

US Person or eligible to receive an Export License
Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law

Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72128
Job Location: Monroe, WA
Rate: $42-$48 an hour
Per Diem: NO
Overtime: POSSIBLE
Duration: 6+ month contract
Start Date: ASAP
Input Date: 02/18/2026

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: breanna Lashley
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: blashley@butler.com
Website: www.butler.com

QUALITY ENGINEER

Description:
Quality Engineer
Location: Coventry, RH
Job ID: #72143
Pay Range: $62-77 an hour
12 month contract

The Quality Engineer is responsible for the support our engineering team by handling day-to-day shop floor assistance
tasks and responding to quality issues.
This position is onsite in Coventry, Rhode Island.
What you'll be doing as a Quality Engineer:- Assist quality engineering with generation of testing and qualification test
instructions, finding sources for testing and testing equipment, performing internal testing, maintaining test and quality
records and samples, observe external testing as required.
- Participate in scheduling for internal and external quality audits to maintain AS9100 standards.
- Assist quality engineering efforts for the site for AS9100 standards and coordinate with all stakeholders.
- Assist quality engineering in developing and documenting quality metrics aligned with AS9100 standards.
- Assist quality engineering in tracking and following up on RCCAs.
- Perform in process inspections and basic incoming inspections.
- Other tasks as related and requested i.e., conduct quality audits and inspections; review and log training documentation;
assist with maintaining document control procedures.

US Person

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law

Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72143
Job Location: Coventry, RI
Rate: $62- $77 AN HOUR
Per Diem: NO
Overtime: POSSIBLE
Duration: 12 MONTH CONTRACT
Start Date: ASAP
Input Date: 02/18/2026

Field Engineer

Description:
Field Engineer
Location: Los Angeles, CA
Job ID: #72158
Pay Range: $40-47
Duration: 12 months contract

Job Description:
Conducts technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications and implementations. Troubleshoots technical problems and issues, determines technical solutions in accordance with product and customer specifications, and recommends actions to company or customer representatives for coordinated product solutions. Assesses product needs in accordance with customer specifications. Conducts technical training and product briefings with customers, vendors, and company representatives. Acts as a local on-site representative to the customer's organization.

Program Job Description:
The technical support individual will be responsible for completing hands-on work, including testing, troubleshooting, and repairing electronic hardware in a fast-paced environment. This role requires the ability to lift up to 35 pounds and perform various tasks, such as working with bonding adhesives, weighing, measuring, and mixing chemicals, as well as soldering and de-soldering circuit boards and harnesses. Additionally, the individual will utilize hand tools to complete tasks and operate commercial and program-specific test equipment. To diagnose and repair both electronic and mechanical hardware, they will use written procedures, engineering drawings, and diagrams. The successful candidate will be capable of performing tests, diagnosing issues, and repairing electronic hardware with limited supervision. This is a full-time, on-site position located in Los Angeles, California, requiring the individual to work on-site at all times.

Required Experience:

Qualifications to be considered should include a 4-year college degree, a 2-year degree with a minimum of 1 year of relevant experience, an equivalent technical degree, or relevant military experience.
1-3 years experience reading engineering drawings and schematics is required.
1-3 years experience with electronic troubleshooting, with the ability to fault-isolate to individual components is required.
1-3 years experience with electro-optical sensor hardware and software is required
1-3 years experience with commercial and/or military electronics maintenance, including hand tool operation and maintenance is required.

Desired Skills:

The ideal candidate will have familiarity with test equipment operation, troubleshooting, repair, and calibration. 1-3 years experience
Proficiency in Microsoft Office is also preferred. 1-3 years experience
Experience working with commercial test, measurement, and rework equipment, such as oscilloscopes, digital multimeters, and hand-soldering, is also desirable. 1-3 years experience

***Safety shoes are required for this position***

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72158
Job Location: Los Angeles, CA
Rate: $40-47/hr
Per Diem: No
Overtime: Possible
Duration: 12 months
Start Date: 4/6/2026
Input Date: 02/23/2026

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Janita Kewalramani
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Email: jkewalramani@butler.com
Website: www.butler.com

Creo Product Definition Designer

Description:
Creo Product Definition Designer
Location: Huntsville, AL
Job ID: #72207
Pay Range: $60-70 an hour
6 month contract

**U.S. citizenship only, no dual citizenship**

We are seeking a Creo Product Definition Designer to join our facility in Huntsville, Our people further the exploration of space and keep America safe. A world-recognized aerospace and defense leader providing propulsion and energetics to the space, missile defense and strategic systems, tactical systems and armaments areas, our projects present tangible opportunities for you to make a significant impact and be recognized for your outstanding work. In this role, you will provide imaginative, thorough, and practicable solutions to a wide range of technical design problems.

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
Required:

Knowledge of Mechanical Aerospace hardware required.
Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
Ability to read and interpret product definition and related specifications.

Desired:
ASME Certification in GD&T is a plus.

Education:
Requires a Bachelor’s degree in an appropriate discipline and at least 10 years of related experience or an equivalent combination of education. 10 years of experience with CAD systems (Creo 10.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law

Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72207
Job Location: Huntsville, AL
Rate: $60- $70 AN HOUR
Per Diem: NO
Overtime: POSSIBLE
Duration: 6+ MONTH CONTRACT
Start Date: APRIL 2026
Input Date: 03/04/2026

Test Engineer

Description:
Test Engineer
Location: Monroe, WA
Job ID: #72133
Pay Range: $48-57 AN HOUR
6+ Month Contract

This position is responsible for supporting all aspects of testing for hydraulic and electro-mechanical systems components.

JOB RESPONSIBILITIES:
• Setting up & running automated tests for electro-mechanical & hydraulic actuation components
• Learning how to troubleshoot all aspects of our test systems
• These systems include multi-axis hydraulic loading systems, thermal control systems, motor controls and loading systems, and data acquisition systems.
• Maintain software and help maintain calibration on all test equipment
• Develop software for test automation and data acquisition
• Support outside lab testing such as vibration, altitude, humidity, icing, etc.
• Design and assemble data acquisition and control systems

EDUCATION/ EXPERIENCE:
• Bachelor’s Degree in:
• Mechanical, Electrical, Aerospace Engineering or other related field
• Minimum of 5 years engineering experience or relative aviation technical experience.

QUALIFICATIONS:
• Familiarity preferred with software packages such as LabVIEW, MatLab Simulink, MathCad
• Preferred knowledge or experience with any of the following:
o Hydraulic Actuators – Internal Locking and Non-Locking
o Hydraulic Valves, Reservoirs, Accumulators, Pumps
o Hydraulic Power Packs
o Linear and Rotary Electro-mechanical actuators
o Ball-screws, Roller Screws, ACME Screws
o Gears, Splines and Planetary Gear Sets
o Electronic Enclosures
• Preferred experience with the following:
o Regulatory requirements for qualifying and certifying components
o Vibration modes and testing associated with similar components and systems
o Thermal considerations associated with similar components and systems
o Requirements for tests such as: Fatigue; Endurance; Temperature; Limit and Ultimate Loads; Column Buckling; Operating pressures, Proof pressures, and/or Burst Pressures; Impulse Testing; Power and Load
o Test methods used to qualify these types of products
o Motors and controls
• Demonstrated technical and organizational leadership
• Demonstrated ability to identify problems and provide solutions
• Demonstrated ability to work as a team player both internally and externally
• Strong presentation skills
• Excellent analytical and math skills
• Excellent communication skills, both written and verbal
• Understanding and experience utilizing Microsoft Office suite programs (Word, Excel, Access)
• High comfort level with learning and understanding new software programs
• Ability to manage time and work output while completing multiple projects/work assignments

Skills
• Demonstrated technical and organizational leadership
• Demonstrated ability to identify problems and provide solutions
• Demonstrated ability to work as a team player both internally and externally
• Strong presentation skills
• Excellent analytical and math skills
• Excellent communication skills, both written and verbal
• Understanding and experience utilizing Microsoft Office suite programs (Word, Excel, Access)
• High comfort level with learning and understanding new software programs
• Ability to manage time and work output while completing multiple projects/work assignments

Education
• Bachelor’s Degree in: Mechanical, Electrical, Aerospace Engineering or other related field

Preferred Qualifications
• Familiarity preferred with software packages such as LabVIEW, MatLab Simulink, MathCad

• Preferred knowledge or experience with any of the following: Hydraulic Actuators – Internal Locking and Non-Locking, Hydraulic Valves, Reservoirs, Accumulators, Pumps, Hydraulic Power Packs, Linear and Rotary Electro-mechanical actuators, Ball-screws, Roller Screws, ACME Screws, Gears, Splines and Planetary Gear Sets, Electronic Enclosures

• Preferred experience with the following: Regulatory requirements for qualifying and certifying components; Vibration modes and testing associated with similar components and systems; Thermal considerations associated with similar components and systems; Requirements for tests such as: Fatigue; Endurance; Temperature; Limit and Ultimate Loads; Column Buckling; Operating pressures, Proof pressures, and/or Burst Pressures; Impulse Testing; Power and Load; Test methods used to qualify these types of products; Motors and controls

US Person or eligible to receive an Export License

Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law

Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and “Know Your Rights” Poster is available here: Applicant and Employee Notices.

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Number: 72133
Job Location: Monroe, WA
Rate: $48-$57 AN HOUR
Per Diem: NO
Overtime: POSSIBLE
Duration: 6+ MONTH
Start Date: ASAP
Input Date: 02/18/2026

MRB Engineer-Active Secret Clearance Required

Description:
*** MUST HAVE ACTIVE SECRET CLEARANCE***

You will be the Mechanical Review Board Design Engineer for an Air Dominance production team. Our team is responsible for producing key components of the missile system.

As the Mechanical Review Board Engineer, you will be responsible for supporting the production programs by identifying and resolving production issues, defects, and failures.
You will work closely with cross-functional teams to develop and implement viable solutions, often in time-sensitive situations.

Your responsibilities will include:
•Participate as a key member in the Material Review Board (MRB) process, including reviewing non-conforming hardware for performance impacts, identify appropriate root cause and ensure corrective action is taken to prevent recurrence
•Coordinate effort within the Mechanical, Quality and Manufacturing team
•Support weekly meetings to review status to leadership

Required Experience:

•Candidates must have a Bachelor's Degree from an accredited university, preferably in an Engineering related field.

•Candidates must have at least 2 years of experience with Geometric Dimensioning and Tolerancing in accordance with ASME Y14.5 and ability to perform tolerance analysis.

•Candidates must have at least 2 years of experience with Creo design software

•Candidates must have at least 2 years of experience with Root cause and corrective action experience

•Candidates must have at least 2 years of experience with reading engineering drawings, documents, parts lists and specifications

•Be able to lead investigative effort and report status to interdisciplinary teams

Job Number: 72175
Job Location: Grand Prairie, TX
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 02/26/2026


Back to Advanced Job Search